Used Drilling Rigs in Kentucky, USA

2005 TAMROCK PANTERA 1100
- Manufacturer: Tamrock
- Model: Pantera 1100
3.5”- 4.5” Inch Class CAT C-9 Diesel Engine HL1000 / HL1010 Class Drifter
Louisville, KY
2005 INGERSOLL-RAND ECM585
- Manufacturer: Ingersoll Rand
- Model: ECM-585
2.5 – 3.5 Inch Class Montabert HC109 Drifter Excellent Condition Engine Hours 5416.2 Percussion has ONLY
Louisville, KY
2002 INGERSOLL-RAND ECM680
- Manufacturer: Ingersoll Rand
- Model: ECM-680
3.5” – 4.5” Inch Class HC150 Drifter Set up for T51 Cummins Diesel Engine
Louisville, KY
2015 ATLAS COPCO SMARTROC T45
- Manufacturer: Atlas-Copco
- Model: SMARTROC T45
4.5 – 5.5 Inch Class CAT C9.3 TIER 4 Engine COP 2560 Drifter Like new, only 500 Hours CAT C9.3 TIER 4 Engine – 325 HP @ 2000 RPM Compressor – Atlas FAD @ 175psi, 473cfm Hydraulic Drifter – COP 2560 – 33.5 HP impa...
Louisville, KY
2005 Sandvik Pantera 1500
- Manufacturer: Sandvik
21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age
$49,500 USD
Louisville, KY
2024 SOOSAN JD800E-II
- Manufacturer: Soosan
New 2024 Soosan JD800E-II Rock Commander w/ QSB6.7 Series Tier 4 Final Equipped with JET9II Drifter 235 CFM @ 150 PSI Air Package Can be setup for T38, T45, or T51 – Customer Choice Unit starts a 14’ft starter st...
Louisville, KY
2019 Furukawa HCR1450EDII Stock# 4501
- Manufacturer: Furukawa
- Model: HCR1450EDII
Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition.
$273,000 USD
Louisville, KY
2006 Atlas Copco ROC D3
- Manufacturer: Atlas-Copco
- Model: ROC D3
- Hours: 3,979 hour
Equipped with COP 1240 Drifter 28 hours on machine since upgrades: New track chains New Ecm motor control New mast roller New cable New nose cone seals New accumulator diaphragms 2 new control switches at control...
$55,000 USD
Louisville, KY
1997 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A Drifter – Ready to work – Repairs needed are one door with broken hinges – Fuel stop solenoid – This machine has a new air end and has less than 200 hours on hydraulic pump
$40,000 USD
Louisville, KY
2005 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A – Ready to work – Repairs needed are inoperable fuel stop solenoid
$65,000 USD
Louisville, KY
2006 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A Drifter – Repairs needed or in the process of being repaired – Dust collector top new part has been fabricated need’s installed – Rod changer arm is broken have new parts to replace purchase...
$70,000 USD
Louisville, KY
2004 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A Drifter – Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. – Other repairs needed are inoperable fuel stop solenoid
$50,000 USD
Louisville, KY
2004 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Comes with YH70 not currently installed but will be mounted for transport – This unit has tracking issues will move but unknown if it’s the final drives or hydraulic motors. – Hammer needs to be mounted back on...
$15,000 USD
Louisville, KY
2000 Ingersoll Rand ECM590
- Manufacturer: Ingersoll Rand
- Model: ECM-590
– Equipped with YH80A Drifter – Unit needs nothing is currently running on a job at this time. – Has newer paint job – Manual rod changer – Long boom
$50,000 USD
Louisville, KY
Furukawa HD712 Hydraulic Drifter
- Manufacturer: Furukawa
HD712 Hydraulic Drifter / Hammer – Surplus / New For use on the following Furukawa machines: HCR1200ED HCR1200EDII
$40,000 USD
Louisville, KY
Tamrock Pantera 900 Drilling Rig
- Manufacturer: Tamrock
- Model: Pantera 900
Good condition Tamrock Pantera 900 Drilling Rigs available between 1998 and 2005 years. Located in USA and other countries. Click request price for more information.
USA