- Trusted Seller
Microcut VMCF-760 I Vertical Machining Center I 2007
- Manufacturer: Microcut
- Spindle taper: ISO 40
We hereby offer this used Microcut VMCF-760 vertical machining center from 2007, located in Czech Republic. It features a working area of 900 x 410 mm, providing ample space for a variety of machining tasks. Equi...
Czechia - Trusted Seller
2021 Microcut Microcut M 1050
- Manufacturer: Microcut
The machine in good technical condition, can be tested under power.
Brno, Czech Republic - Trusted Seller
2007 Microcut VMCF-760
- Manufacturer: Microcut
Control system: Fagor 8055 MC | Length of the working table: 900 mm | Width of the working table: 410 mm | X-axis travels: 760 mm | Y-axis travels: 430 mm | Z-axis travels: 450 mm | Taper: ISO 40 | Machine weigh...
Brno, Czech Republic - Trusted Seller
2018 Microcut M 1200
- Manufacturer: Microcut
Control system: Siemens Sinumeric 828D SW4 | Length of the working table: 1400 mm | Width of the working table: 710 mm | Maximum table load (evenly distributed): 1000 kg | X-axis travels: 1200 mm | Y-axis travel...
Brno, Czech Republic - Trusted Seller
2021 Microcut M 1050
- Manufacturer: Microcut
Control system: Heidenhain TNC 620 | Total hours: 4727 h | Hours on: 2942 h | Length of the working table: 1200 mm | Width of the working table: 600 mm | Number of stack positions: 30 | Block speed: 12000 1/min ...
Brno, Czech Republic - Trusted Seller
2007 MICROCUT MM 430
- Manufacturer: Microcut
- Model: MM430
Equipment: Drills Chuck 2x Vice Tools Control system: FAGOR | Length of the working table: 900 mm | Width of the working table: 400 mm | Number of stack positions: 16 pcs | Number of tools in the magazine: 16 pcs...
Brno, Czech Republic - Trusted Seller
2015 Microcut MICROCUT CHALLENGER VMC 1600 F
- Manufacturer: Microcut
- Model: VMC1600F
- Spindle taper: ISO 40
Machine in very good condition, about 10.000 working hours, includes Renishaw OMNP 60 + TS 27R probes and also some tools. Can be tested anytime afterr agreement.
Brno, Czech Republic - Trusted Seller
2015 Microcut Challenger 1000
- Manufacturer: Microcut
- Spindle taper: ISO 40
The machine is in good technical condition. Number of hours worked - only 4500 hours. The offer also includes a larger number of tools.
Brno, Czech Republic
Tip: Enter manufacturer, model or keyword