Used Electrical Test Instruments in Dublin, Ireland

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

emtest VDS200N

• Manufacturer: emtest

Details emtest VDS200N (contact Axiom for availability) The emtest VDS200N Voltage Drop Simulator is used to simulate the various battery supply waveforms recommended by international standards and by car manufac...

High Voltage Inc VLF-65E

Details HVI VLF-65E VLF Hipot The HVI VLF-65E is a part of the enhanced line of hipot testers from High Voltage Inc. HVI AC hipots incorporate an air-cooled, solid state design with microprocessor control. Test p...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

Marconi IFR Aeroflex 2025

• Manufacturer: Aeroflex

Details The Marconi-IFR-Aeroflex 2025 is a dual RF Signal Generator with dual outputs, covering 10 kHz to 2.4 GHz. It delivers excellent spectral purity, high output accuracy, and versatile modulation options, ma...

Fluke QA-ES III

• Manufacturer: Fluke

Details Fluke QA-ES III Electrosurgical Analyzer and Tester The Fluke QA-ES III Electrosurgical Analyzer and Tester is a comprehensive electrosurgical analyzer designed to ensure the safety and performance of el...

Schaffner NSG 651

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG651 Telecom Surge Generator delivers hybrid pulses of 1,2/50 µs up to 6,6 kV and 8/20 µs up to 3,3 kA, addressing IEC 801-5, ANSI‑IEEE C62.45 and VDE 0109 requirements. It also provides t...

Schaffner NSG 203A

• Manufacturer: Teseq - Schaffner

Details The Keysight (Agilent) Teseq Schaffner NSG203A plug‑in module is engineered to precisely simulate short‑term line voltage variations and complete failures. When shifting from a high voltage (e.g. 150 V) t...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Teseq NSG4070C-35

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG4070C-35 Test System For Conducted And Radiated Immunity is a versatile immunity test system designed for precise conducted and radiated immunity testing across various frequency ranges. It s...

Fluke 369-FC

• Manufacturer: Fluke

Details Fluke 369-FC Wireless Leakage Cur Clamp The Fluke 369-FC Wireless Leakage Cur Clamp helps users to detect, document, record and compare leakage cur readings over time as a means of preventing unplanned ...

Teseq (Schaffner) NSG 3060

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-3060 is a modular, expandable immunity test system capable of generating surge voltages up to 6.6 kV for overtesting. It integrates IEC and ANSI coupling methods and features a 7″ ...

Teseq NSG3040

• Manufacturer: Teseq - Schaffner
• Model: NSG 3040

Details The Teseq NSG3040 Immunity Test Multifunction Generator is a modular, expandable EMC system designed for high-precision immunity testing. Capable of surge voltages up to 4.4 kV, EFT/Burst up to 4.8 kV, an...

Rohde & Schwarz FSET22

• Manufacturer: Rohde & Schwarz

Details The Rohde & Schwarz FSET22 Test Receiver offers a frequency range from 100Hz to 22GHz, delivering high sensitivity and precise spectrum analysis for advanced testing applications. It supports wide dynamic...