Used Forging Presses

1,300 ton Maxipres w/air clutch & brake, Re:26054

Forge tons: 1,179.3 tonnes | Manufacturer/model: National Maxipres | Stroke: 254 mm | Sh: 635 mm | Spm: 80 | Bed lr: 889 mm | Bed fb: 1,041 mm | Ram face l-to-r: 787 mm | Ram face f-to-b: 787 mm | Distance betwe...

2,500 ton Maxipres, air clutch & brake, Re:26052

Forge tons: 2,268 tonnes | Manufacturer/model: National / Maxipres | Stroke: 356 mm | Sh: 991 mm | Spm: 55 | Bed lr: 1,206 mm | Bed fb: 1,372 mm | Ram face l-to-r: 1,067 mm | Ram face f-to-b: 1,118 mm | Distance...

1991 WILLIAMS-WHITE 2000 TON HYDRAULIC VERTICAL PRESS

• Manufacturer: Williams - White

• COMPLETE UNIT • 2000 TON HYDRAULIC VERTICAL PRESS (72 INCH STROKE LENGTH, 146 INCHES PER MINUTE PRESS SPEED) • HYDRAULICS WITH OIL COOLER • ELECTRICAL • PLCS AND CONTROL SYSTEM (SHARED CONTROL PANEL WILL REQUIR...

1986 6,300 ton Kramatorsk K8548 Heavy Press, 460mm stroke,

• Manufacturer: Kramatorsk

Forge tons: 6,300 tonnes | Manufacturer/model: Kramatorsk | Stroke: 460 mm | Sh: 1,150 mm | Spm: 40 | Bed lr: 1,600 mm | Bed fb: 1,900 mm | Ram face l-to-r: 1,680 mm | Ram face f-to-b: 1,680 mm | Upper knockout ...

1980 1″ NEDSCHROEF 4-DIE model BV6 High Speed Boltmaker (REBUILT 2017)

• Manufacturer: Nedschroef

1″ NEDSCHROEF 4-DIE model BV6 High Speed Boltmaker (Rebuilt by Nedschroef 2017) SPECIFICATIONS: FEATURES: * TIMED KNOCKOUTS IN ALL STATIONS * IFO TRANSFER * THREADING STATION * SOUND ENCLOSURE

2016 8,300/11,000 tonne Asian Built Press 4-Column

• Manufacturer: Asian Built

Force: 8,300 tonnes | Hydraulics: Oil | Stroke: 3,200 mm | Daylight: 7,000 mm | Table l-r: 9,000 mm | Upsetting tonnage: 11,000 tonnes | Press action: Push Down | Number of columns: Four | Distance between colum...

1951 5,000 ton Lake Erie Push Down type

• Manufacturer: Erie Press Systems

Additional info: Equipped With: Rubber Pad Fluid Forming Unit Top Mounted Hydraulic Power Unit Including: (1) 60 HP Oilgear Hydraulic Pump #DX-6011 - 880 RPM - 1100 Rated Pressure (1) 150 HP Oilgear Hydraulic Pum...

1942 ACME HILL XN

• Manufacturer: Acme
• Model: XN

Die depth: 22" | Die width: 14" | Die length: 19-1/4" | Die opening: 5" | Tool holder pocket width: 5" | Stock gather: 7-5/8" | Hold: 2" | Stroke: 12" | Header slide length: 80" | Hp: 30 | Forging pressure: 630 ...

Nedschroef Model NH416 4 Die Progressive Header

• Manufacturer: Nedschroef

Maximum bolt diameter: 16mm | Maximum bolt length: 140mm | Maximum cutoff length: 170mm | Die diameter (maximum): 90mm | Die length: 165mm | Kickout length pko: 38mm | Forging load: 1500 KN | Maximum cutoff diam...

1972 ASAHI OKUMA ORH 120

• Manufacturer: Okuma

Maximum cutoff length of wire: 130mm ( 4" ) | Maximum kickout length 1st die: 130mm ( 5" ) | Maximum kickout length 2nd die: 90mm ( 3-9/16" ) | Die hole diameter 1st die: 65mm ( 2% ) | Die hole diameter 2nd ...

2006 JERN YAO JNFP 14B5S

• Manufacturer: JERN YAO

Max. cut-off dia.: 14 millimeters | Max. cut-off length: 13 millimeters | Maximum kickout: 15mm | Maximum pko stroke: 8mm | Maximum production: 280 PPM | Electrics: 30 HP ACVD Motor and Controls | Approx. weigh...

6,300kg Weingarten PSH4.560f, max stroke 23.6",

• Manufacturer: Weingarten

Nom force: 5,300 tonnes | Max force: 6,300 tonnes | Builder: Weingarten | Screw dia: 560 mm | Stroke: 600 mm | Spm: 35 | Table l-to-r: 1,300 mm | Table f-to-b: 1,400 mm | Distance between the uprights: 1,500 mm ...

2013 750 ton J&H Model JFP-750L, 300mm stroke,

Forge tons: 750 tonnes | Manufacturer/model: J&H JFP-750L | Stroke: 300 mm | Spm: 85 | Bed lr: 850 mm | Bed fb: 900 mm | Ram face l-to-r: 740 mm | Ram face f-to-b: 780 mm | Upper knockout stroke: 20 mm | Lower k...

1950 3,000 ton National Maxipres with Air

Still installed and under power for inspection Very good working condition

1970 2,000 ton National Maxipres with Air

Still installed and under power for inspection Very good working condition