Used Processing in Opole, Poland

Cells

5 cells Inlet 30 x 30 cm Motor 0.75 kW – Width 75 cm – Depth 40 cm – Height 72 cm Cells are available for viewing and purchase in our warehouse by appointment – please contact us.

Ash conveyor, waste removal from the furnace �� 34

Length 4.50 m Screw diameter 180 mm Outer diameter 210 mm Motor with geared motor 1.1 kW

Kohlbach biomass stove 400 KW heating power 29

Furnace with 400 KW heating power TYPE K 8 - 400 Furnaces for biomass, bark, woodchip, sawdust. Fuel feeder Heat exchanger from 2009

Wentylatory do piecy, nadmuchowe i odciągowe

Fans with various parameters, functional.

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Belt conveyor with bevel for grain, etc.

Grain conveyor Level length 1.20 m Bevel length 3.30 m Level length at the top 1 m Belt width 39 cm Total width 65 cm Chute 25 x 15 cm Discharge at a height of 3.20 m

Scraper, redler for sawdust, woodchips, etc. 58

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

Length 7, 50 m Length of takers 28 cm Dimensions of the channels 29 x 18 cm

Conveyor belt, conveyor belt TA 253

Length 22 m Tape width 30 cm New tape Total width 40 cm Motor 1,7 KW

Furnace for drying sawdust and wood chips

Cells

Cells (2 pcs.) Inlet 27 x 14 cm Engine 1.2/0.81 KW

Tank, expansion tank made of acid-resistant sheet metal

Height 3 m Diameter 2 m Total height 4.20 m Tank as shown in the photos

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Conveyor belt, conveyor belt, driven, diagonal TA 259

Length: 8.00 m Belt width: 50 cm Total width: 90 cm Belt runs diagonally, rising approximately 3.00 m