Used Processing in Hamburg, Germany

2010 Breton Smart cut NC 800-
- Manufacturer: Breton
- Model: Smart Cut
CNC machining center with 5-axis head Disc diameter 800 MAX. length mm 3500 MAX. width mm 2000 MAX. thickness mm 240 Machine configuration X-axis travel mm 3800 Y-axis travel mm 2800 Z-axis travel mm 550 Axis rot...
Hamburg, Germany
2005 Intermac Master 45-
- Manufacturer: Intermac
- Model: Master 45
More used machines at: https://www.janssen-usedmachines.com/ New machines at: www.janssen-steintechnik.de 5 axis CNC machining center for stone + glass approx. 8,000 operating hours (including only approx. 100 ho...
Hamburg, Germany
2013 GMM ZEDA 38-
- Manufacturer: GMM
- Model: Zeda
CNC 5-Axis Bridge Saw - Refurbished with 6 months warranty. Installation and training can be provided at extra cost. Number 5 interpolated axes X – Y – Z – R – W Rotating head 0°÷370° Tilt head -15°÷ +105° Max. a...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.1
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2019 PTM Pieropan Telaio-
- Manufacturer: Pieropan
Special gang saw Usable cutting length: 3500 mm Usable cutting height: 2200 mm Usable cutting width: 300 mm Maximum number of saw blades: No. 4 (or No. 5 with tension reduced by 20% for a total of 36 tons) Saw bl...
Hamburg, Germany
2009 Omag Blade NC 700-
- Manufacturer: Omag
CNC bridge saw with 5-axis head 1st bridge: 5-axis saw 2nd bridge: Vacuum suction cup for unloading Saw blade diameter 700 mm Y-axis approx. 15,000 mm X-axis 4,000 mm Z-axis 300 mm Underfloor saw NUM CNC control ...
Hamburg, Germany
2015 Marchetti AXCO Z 1000-
- Manufacturer: Marchetti
CNC bridge saw, 5 axes with vacuum panel separator Marchetti Axco Z1000, including hydraulic tilting table Head rotatable 370° and aiming laser Solid, hot-dip galvanized machine frame mounted on steel foundations...
Hamburg, Germany
2002 BARSANTI -
- Manufacturer: Barsanti
BLOCK CUTTER and CROSS CUTTER Saw blade 1,600 Complete with trolley for blocks and cross-cut saw Voltage V. 380 Hz 50
Hamburg, Germany
1994 Comandulli New System 180-
- Manufacturer: Comandulli
Edge grinding machine for straight and round edges Voltage: V. 400 Hz 50
Hamburg, Germany
1998 Guglielmi BIS 1202G HOPN-
- Manufacturer: Guglielmi
Edge polishing machine Compressor Güde Voltage 400 V 50 Hz Weight 3,500 KG More used machines at: https://www.janssen-usedmachines.com/ New machines at: www.janssen-steintechnik.de
Hamburg, Germany
1988 Spielvogel 364-
- Manufacturer: Spielvogel
Bridge saw Operating hours approx. 73,900 (the machine is still in use from time to time) Max. saw blade diameter is 800mm The machine can be swiveled for bevel cuts. The table can be rotated manually.
Hamburg, Germany
1985 Spielvogel 1200-
- Manufacturer: Spielvogel
Bridge saw Operating hours 73871 Rotary table originally electrically driven, was converted to manual about 4 years ago. The machine is fully functional and was in use until the end of 2023.
Hamburg, Germany
2017 Dr. Schulze FS 800 LST 11
- Manufacturer: Dr. Schulze
Electric joint cutter as good as new, only used for testing purposes 11 KW, 400 volts, operating hours: 4 More used machines at: https://www.janssen-usedmachines.com/ New machines at: www.janssen-steintechnik.de
Hamburg, Germany
2013 Rellok RSF 750
- Manufacturer: Janssen Steintechnik
Joint cutter with additional 1500 mm blade protection Extraction system and diesel particle filter Operating hours: 1353 Reconditioned in 2018 More used machines at: https://www.janssen-usedmachines.com/ New mach...
Hamburg, Germany
1992 Vacu Stone Lift N3 Z
- Manufacturer: Vacu Stone Lift
Large vacuum lifter Horizontal 2000 mm Vertical 800 mm Capacity AT- 0.9 bar
Hamburg, Germany