Used Tanks & Kettles in Germany

25000 liter ISO tank container / heat-/coolable pressure tank, Aisi 316

• Manufacturer: Van Hool

max. allowable working overpressure (dj): 3.0 bar remarks: Material in contact with product: 1.4402 (Aisi 316L); Frame, Fe (painted); technical description available; diameter manhole 500 mm; the complete technic...

25000 Liter 22T6 ISO-tank container / heatable pressure tank, Stainless steel

max. allowable working temperature: 120 °C remarks: Includes modular heating system; can be cleaned from the inside for an additional charge

2550 liter tank, SST

remarks: material: 1.4605; foot frame, Fe; rectangular opening appr. 400 x 400 mm (frame of the cover made of Fe)

1800 liter isolated tank, AISI304

remarks: Length of the tank without cooling unit = 2800mm; the cooling unit does not work, the lid of the manway is missing

Stainless steel storage tank STÖCKLIN - approx. 1,000 litre capacity, single-walled, built in 2000.

• Manufacturer: Stöcklin

Elga Reservoir 75l water tank water treatment system tank filtration system

• Manufacturer: Elga

Contents 75 liters Age rating: No age restrictions | Country of manufacture: Germany | Content: 1 piece | Type: Reservoir 75l | Kind: Water tank | Item condition: second hand

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

2645 liter tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar

630 liter tank, AISI 316

notice: some residues of previous content, manhole cover plated

3000 liter tank, Aisi 304

• Manufacturer: ALFA-LAVAL

remarks: Manhole approx. 400 x 510 mm; 2 pipes inside the tank

3500 liter tank, Aisi 304

remarks: Diameter manhole appr. 455 mm; smaller dents in the inner cylinder; insulation cover of the lower bottom by plate of mild steel; tank 7061-2 with dents in the insulation jacket and an outlet DN 65 11851

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

15500 liter tank, Aisi 304

remarks: bearing shells cut-off below; 1 manhole diameter 430 mm in the front bottom; former connections welded closed

15600 Liter tank, Aisi316

Volume: 15.600 liter | Total height: 2.000 mm | Total width: 3.420 mm | Total length: 3.500 mm | Technical documentation: drawing | Manhole: on the tank | Notice: some residues of previous content | Latest appli...

11000 liter tank, Aisi 316

remarks: 1 manhole diameter 500 mm in the lower cylinder area; 1 hand hole NW 200 in the upper cylinder area (attention: manhole cover and hand hole cover made of Aisi 304); Tank with adhesions inside; slight rus...