Used variable speed

16" WIDE X 14" ROLL DIAMETER 2-HI INTERNATIONAL 100 HP ROLLING MILL. #0886125

• Manufacturer: International

INDEPENDENT AND COMBINED ROLL ADJUSTMENT Roll width: 16" | Roll diameter: 14" | Roll adjustment: 4" | Passline height: 40" | Drive motor: 100 HP | Jog switch: YES FORWARD/REVERSE | Variable speed: YES | Start/sto...

1988 I2S INTEGRATED INDUSTRIAL SYSTEMS I2S #0635621

• Manufacturer: I2S INTEGRATED INDUSTRIAL SYSTEMS

Roll diameter: 5-1/4" | Roll face: 8" | Screw down cylinders: 5" | Separating force: 100,000 LBS | Max system pressure: 3,000 PSI | Electrics & hydralics: MOUNTED ON COMMON BASE | U-joint drive: YES | Exit pinch...

20" WIDE X 22" ROLL DIAMETER 4-HI BLISS 100 HP POWERED ROLLING MILL. #0886025

• Manufacturer: Bliss

INDEPENDENT AND COMBINED ROLL ADJUSTMENT Roll width: 20" | Roll diameter: 22" | Work roll diameter: 8" | Roll adjustment: 5" | Passline height: 40" | Drive motor: 100 HP | Jog switch: YES FORWARD/REVERSE | Variab...

CUSTOM 24" METAL EMBOSSING ROLLS (14340)

• Manufacturer: Custom Built

used CUSTOM 24" Metal Embossing Machine, Stock #14340. Features a 20 HP variable speed motor, air clutch, and adjustable rolls. Conditions apply. 24" METAL EMBOSSING MACHINE Stock # 14340 **Temporary Specificatio...

DRIVEN FLATTENER

Condition: As is; Sheet width: 50” | Roll width: 52” | Rolls: 5 over 7 all driven | Motor: 7.5 HP / 1750 RPM / 3Phase - 60Hz, 220-440 Volts | Roll diameter: 2” | Speed: Variable

STANDARD 14" x 16" 2 HIGH ROLLING MILL (14538)

• Manufacturer: Standard Industrial

14" X 16" STANDARD 2 HIGH ROLLING MILL Stock # 14538 INDEPENDENT AND COMBINED ROLL ADJUSTMENT **Temporary Specifications Subject to Revisions** **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIFIC...

BLISS 8" x 22" x 20" 4 HIGH ROLLING MILL (14537)

• Manufacturer: Bliss

8" X 22" X 20" BLISS 4 HIGH ROLLING MILL Stock # 14537 INDEPENDENT AND COMBINED ROLL ADJUSTMENT **Temporary Specifications Subject to Revisions** **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIF...

RUESCH 2 HIGH ROLLING MILL Stock # 14280

• Manufacturer: Ruesch

12" (305mm) x 12" (305mm) Ruesch 2 High Stock # 14280 MANUFACTURER: RUESCH MACHINE CO. (USA) INTERMEDIATE MILL FOR COPPER/STEEL/ALUMINUM CLADDING/BONDING MILL FOR DUAL STRIP REVERSING AS A STAND-ALONE MILL 60 HZ ...

FENN 6" x10" 2 HI CLADDING MILL

• Manufacturer: FENN

6" X 10" FENN 2 HI ROLLING MILL CLADDING LINE (1) USED 6" X 10" FENN 2 HIGH ROLLING MILL USED FOR CLADDING MILL STAND WINDOW ................ MODEL ............................ 60-12 6000 LB FENN RECOILER 13 SETS...

Mill, Roll, 3-Roll, 3.5" x 7.5", Stainless Steel, Cored Rolls, AB Controls, #5991656

• Manufacturer: Keith

Keith Machinery three-roll mill with 3-1/2" diameter × 7-1/2" long stainless-steel rolls, fully cored for heating and cooling, and equipped with adjustable roll spacing and side guides. Manual handwheel roll cont...

12" x .125" PERFECTO POWERED STRAIGHTENER 15058N

• Manufacturer: PERFECTO

MODEL #: 22-12-7 SERIAL #: S5-76584 12" MAXIMUM COIL WIDTH .020" - .125" THICKNESS CAPACITY 7 ROLLS ENTRY AND EXIT PINCH ROLLS VARIABLE SPEED MOTOR GOOD CONDITION

1985 1" X 2" BUHLER “EW100” 2HI FINISHING-MILL w/ TOOLING

• Manufacturer: Bühler

1" X 2" BUHLER 2HI FINISHING-MILL NEW 1985, SERIAL NO 574, MODEL EW100 Imperial Metric EQUIPPED WITH: MANUALLY ADJUSTABLE ROLL VARI-SPEED DRIVE (Will Need Repair) INFINITELY VARIABLE SPEED CONTROL SWING AWAY PEND...

12" x .160" REGAL STRAIGHTENER 13032D

• Manufacturer: Regal
• Model: 250-55-12

SERIAL #: 5782340 MODEL #: 250-55-12 YEAR: 1978 12" MAXIMUM WIDTH CAPACITY .160" MAXIMUM STOCK THICKNESS 7 ROLLS AIR LIFT ENTRY AND EXIT PINCH ROLLS VARIABLE SPEED MOTOR GOOD CONDITION

12" X .135" REGAL Straightener Z21019G

• Manufacturer: Regal

SPECIFICATIONS: 4 Over 5, 2" Diameter on 3" Centers Mounted Onto a Manually Adjustable Centering Base, 8-1/2" Total Left-to-Right Adjustment Stock Width: 12" Thickness: .012 to .135 Roll Length: ...