Used coil processing

V-60-16-N VICON DUCT-LINE EXPRESS AUTOMATIC RECTANGULAR DUCT SYSTEM

• Manufacturer: Vicon

* 16-30 Gauge mild steel capacity * 12,000 lbs maximum coil capacity (with coil drive) * Up to six coil stations available * Quick-change coil spools (patented) * Hydraulic coil drive * Powered in-feed guide ramp...

PLASMA FEEDING SYSTEM VICON MADE IN THE USA

• Manufacturer: Vicon

FEATURES: * 16-28 gauge mild steel capacity * 12,000 lbs maximum coil capacity (with coil drive) * Coil widths from 48"-60" standard (72" width optional) * Up to six coil stations available * Quick change coil sp...

JÖRG Multiple Decoiler 2910 - 2952

• Manufacturer: Jörg

The JÖRG Multiple Decoiler 2910 - 2952 allows the operator to choose from 4 or 6 different coils to cut. After hanging the coils in the frame, the operator can change the plate by operating the push buttons, with...

JÖRG Decoiler 2952

• Manufacturer: Jörg

The JÖRG Decoiler 2952 has a hydraulic tension mandrel with a sensor under the coil. Standard with: Frequency-controlled motor Loop control with sensor under the coil Operation with portable control box on cable ...

JÖRG Decoiler ASM

• Manufacturer: Jörg

The JÖRG Decoiler ASM Motorized, cantilever fully steel welded frame and adjustable brake to prevent auto unwinding. The mandrel is selve centering so that different coil ID are simple to change. Cantilever, Coil...

JÖRG Decoiler ASF 1250

• Manufacturer: Jörg

The JÖRG Decoiler ASF 1250 Manual Self Support are fully steel welded frame decoiler models with an adjustable brake to prevent auto decoiling. The coil support spindle is excecuted with an self centering device ...

JÖRG Decoiler ASF 1000

• Manufacturer: Jörg

The JÖRG Decoiler ASF 1000 Manual Self Support are fully steel welded frame decoiler models with an adjustable brake to prevent auto decoiling. The coil support spindle is excecuted with an self centering device ...

M1291 Zinc table Used

M1291 Zinc table Used 1000 x 1000 mm, on castors Table: 1000 x 1000 mm Material: zinc/copper/steel/aluminium, etc.

M1099 Kader Marking Table PRV 55 Used

M1099 Kader Marking Table PRV 55 Used 1000 x 1000mm with 2 x 4 adjustable centres for marking out gutters Kader Typ PRV55 2 x 4 adjustable centres Measure of centre points Table: 1000 x 1000 mm Material: zinc / c...

JÖRG Decoiler AS 5/1250

• Manufacturer: Jörg

The JÖRG Decoiler AS 5/1250 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ar...

JÖRG Decoiler AS 1,5/1000

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1000 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...

JÖRG Decoiler AS 1,5/1500

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1500 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...

JÖRG Decoiler AS 5/1000

• Manufacturer: Jörg

The JÖRG Decoiler AS 5/1000 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ar...

JÖRG Decoiler AS 1,5/1250

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1250 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...