- Trusted Seller
(1) Pre Owned Wilton / MEP Cobra 350 Cold Saw
- Manufacturer: MEP
- Model: Cobra 350
Cutting Capacity at 90 Degrees Cutting Capacity at 45 Degrees Left Cutting Capacity at 45 Degrees Right Motor 2.2 KW
Milwaukee, WI - Trusted Seller
2005 MEP Tiger 350 NC FE
- Manufacturer: MEP
- Model: Tiger 350
Cutting Capacities: Machine type: Cold Saws | Machine location: Florida | Stock #: 269468 | Round stock (90 degrees): 4-3/4″ | Square stock (90 degrees): 4-1/4″ | Rectangular stock (90 degrees): 7″ x 3-3/4″ | Exe...
- Trusted Seller
2002 MEP, SEMI-AUTOMATIC COLD CUT SAW MODEL TIGER 350 SX
- Model: Tiger 350
EQUIPPED WITH: COOLANT PUMP & TANK MATERIAL LENGTH GAUGE, 600mm VERTICAL CLAMP AIR/OIL DOWN FEED SYSTEM VERTICAL SLIDE TYPE CONDITION: Pre-Owned If you can't find the exact pre-owned machine you're looking for in...
Ontario, Canada - Trusted Seller
2025 MEP SHARK 281 SXI EVO
- Manufacturer: MEP
- Model: Shark 281
Round: 120 mm | Square: 110 mm | Flat: 110 x 110 mm | From: 36 m/min | Up to: 72 m/min | Band length: 2950 mm | Band width: 27 mm | Sheet thickness: 0.9 mm | Vice opening: 285 mm | Voltage 50 hz 3x: 400 Volt | S...
Brügg, Switzerland - Trusted Seller
1999 MEP Tiger 350 CNC FE
- Manufacturer: MEP
- Model: Tiger 350
Manuals Perfect for cutting of copper and brass because of the high speed. 2-speed (high / low). This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclus...
Gnosjö, Sweden - Trusted Seller
MEP Shark
- Manufacturer: MEP
- Model: Shark
Maximum vice opening: 335 mm | Tape dimensions: 3650 x 27 x 0.9mm | Blade motor power: 1.5 / 1.8 kw – Three-phase | Blade rotation speed: 40 / 80 m/min – 2 speeds
Deruta, Italy - Trusted Seller
2007 MEP SHARK 330 NC eco
- Manufacturer: MEP
- Model: Shark 330
This MEP SHARK 330 NC eco was manufactured in 2007. A robust metal band saw, it features a maximum vise opening of 335 mm and can handle round materials up to 300 mm, square materials up to 250 mm, and flat mater...
Italy - Trusted Seller
MEP Shark 282 CCS
- Manufacturer: MEP
- Model: Shark 282
- with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried o...
Günzburg, Germany - Trusted Seller
MEP Shark 281 SXI EVO
- Manufacturer: MEP
- Model: Shark 281
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
Günzburg, Germany - Trusted Seller
Band saw for metal workshop Shark 200 MACHINERYWORKSHOP MACHINERY
- Manufacturer: MEP
- Model: Shark
- Cutting capacity up to Ø160 mm (0°) - Angled cuts at 45° and 60° (left and right) - Manual vice with angle scale - Emergency stop button WORKSHOP MACHINERY Hydraulic arrow 1000 kg, with wheels, brand HERMED. HE...
Alicante, Spain - Trusted Seller
MEP Shark 332-1 SXI EVO
- Manufacturer: MEP
- Model: Shark 332
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany - Trusted Seller
MEP Shark 282 SXI EVO
- Manufacturer: MEP
- Model: Shark 282
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany - Trusted Seller
Manual saw MEP SHARK 282
- Manufacturer: MEP
- Model: Shark 282
For cutting from -45 ° to + 60 ° maximum vise opening 285 mm. absorbed power 2.3 kw it is also made in the CCS variant (it allows the execution of single cuts without an operator using pesto of the head....) Pro...
Italy - Trusted Seller
Mep Cobra 350CNC FE
- Manufacturer: MEP
- Model: Cobra 350
Blade tilt -45° / +45°. Maximum clamp opening 180 mm Feeding length no longer supplyable 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds
Scerne, Italy - Trusted SellerAuction
1998 MEP Shark 200
- Manufacturer: MEP
- Model: Shark
Equipped with 3880mm in feeding conveyor, 1820mm out feeding conveyor Online auction of best brands sheet metal working machines and tools (e.g. 2014 TRUMPF TruLaser, TruMatic, TruBend press bending, punching and...
Bubikon, SwitzerlandVisit Auction Website
Tip: Enter manufacturer, model or keyword