Used in Appenzell Outer Rhodes, Switzerland

Compressed air refrigeration dryer BOGE DS014 cpl.

• Manufacturer: Boge

ID No. 6098 - Used machine - Fully automatic operation - Maximum flow rate 1400 l/min - Air connections G3/4" - Electrical connection 230 V/50 Hz - Level-controlled condensate drain - Includes bypass line - Inclu...

Panel saw STRIEBIG Standard S TRK 1 6224

• Manufacturer: Striebig
• Model: Standard

ID No. 6095 - Used machine - Year of manufacture 2020 - Automatically retractable wooden support wall - Ready for operation

Panel saw STRIEBIG Control 6224

• Manufacturer: Striebig
• Model: Control

ID No. 700 - used machine - automatic dipping and sawing - from place

Compact dust extractor NESTRO NE 200 Jet

• Manufacturer: Nestro

ID No. 6096 - Used machine - 2 x 160 l containers - Pneumatic filter cleaning - Ready for operation

Clean air dust extractor RIEDEX DM 200 JET

ID No. 6083 - Used machine - Maximum flow rate 3200 m³/h - Negative pressure 3000 Pa - Filter area 16 m² - Residual dust content <0.1 mg/h - Intake port diameter = 200 mm - Chip container 2 x 160 l - Automatic JE...

Gluing stand SMP mobile

ID No. 700-6094 - Used machine - from site

Bandsaw LÜSCHER 700

ID No. 6025 - used machine - ready for operation Roll diameter: 700 mm | Cutting width: 680 mm | Cutting height: 390 mm | Engine power: 1.75 kW / 400 V

Bandsaw AGAZZANI Rapid 600

ID No. 6037 - used machine - table tiltable - ready to use

Band saw HEMA SR600

• Manufacturer: Hema

ID No. 6088 - Used machine - Ready for operation Roll diameter: 600 mm | Motor line: 2.2 kW / 400 V | Table size: 540 x 600 mm | Cutting width: 580 mm | Cutting height: 380 mm

Thicknesser UTIS R50

• Manufacturer: Utis

ID No. 6089 - Used machine - Electric height adjustment with digital display - TERSA planer block - Toothed steel feed roller - Smooth steel feed roller - 2 table rollers - Ready for operation

Surface planer UTIS D40

• Manufacturer: Utis

ID No. 6090 - Used machine - TERSA planer block - Ready for operation

Thicknesser UTIS R50

• Manufacturer: Utis

ID No. 5819 - used machine - Electric height adjustment with digital display - strip planer cutterblock - infeed roller steel serrated - pull-out roller steel smooth - 2 table rollers - ready for operation

Feed unit WEGOMA GM68

• Manufacturer: Wegoma

ID No. 34000504 + 34000524 - Machine - 6 feed rollers - 8 speeds (3.5/5.5/7/9/11/14/18/28 m/min) - Incl. stand

Feeding device HOLZ-HER

• Manufacturer: Holz-Her

ID No. 700 - 3-roll feeder - 8 speeds (2/4/5/6/10/12/15/30 m/min) - Includes stand - Ready for use

SCM Sandya 300 RCS 1100 wide belt sander

• Manufacturer: SCM / SCMI
• Model: Sandya

ID No. 6076 - used machine - Pneumatically controlled units - Electronic adjustment of the working height - 4 programmers storable - ready for operation