Used Processing in Illinois, USA

Nanashimaya Engineering Super Dyna Cutter

• Manufacturer: Nanashimaya Engineering

Nanashimaya Super Dyna Cutter for use in cutting strips of boneless meat, poultry and fish products. All stainless steel construction, variable speed conveyor between 4-16 meters/min, maximum product height of 2″...

Vemag HP 12E

• Manufacturer: Vemag

VEMAG HP 12E Vacuum Stuffer. Includes one rolling parts cart, stainless steel construction, 220V/440V/3Ph/60Hz.

Vemag 500

• Manufacturer: Vemag
• Model: 500

Refurbished Vemag 500 Vacuum Stuffer. All stainless steel construction, PC 878 Digital control panel, Fill rate up to 2,700 kg/h, portion speed up to 650 portions/minute, 230 liter hopper, self contained Busch va...

Vemag 500

• Manufacturer: Vemag
• Model: 500

LOW HOUR Vemag 500 Vacuum Stuffer. All stainless steel construction, PC 878 Digital control panel, Fill rate up to 2,700 kg/h, portion speed up to 650 portions/minute, self contained Busch vacuum pump, 220V/3PH/6...

AMFEC 175

• Manufacturer: AMFEC

AMFEC 175 Vacuum Pass-Through Tumbler. 500lbs-15,000lbs capacity, all stainless steel construction, variable speed controls, pivoting doors, vacuum system, dual wheel drive, 20 hp drive motor, 7.5 hp vacuum pump,...

FPEC Work Platform

• Manufacturer: m & m equipment

FPEC Work Platform. All stainless steel worker platform. 6’5″ long x 7’5″ wide x 5’5″ tall mezzanine. Includes 9′ tall handrails, with entrance & exit stairs for the work area.

FPEC Work Platform

• Manufacturer: FPEC

FPEC Work Platform. All stainless steel worker platform. 22′ long x 6′ wide x 5’5″ tall. Includes 9′ tall hand rails, (1) set of entrance & exit stairs for the work area.

Fitzpatrick Mill Chilsonator L89

• Manufacturer: Fitzpatrick
• Model: L89

Fitzpatrick, Model L89 Chilsonator, stainless steel contact parts and capable of processing 100 to 400 Lbs of product per hour – depending on materials and application. The feed system is controlled by both a ver...

2004 Sauer Danfoss 1G10-03-V-0-E-B-XXX

• Manufacturer: Danfoss

Sauer Danfoss direct duty safety relief valve, cartridge type. Valve 1G10-03-V-0-E-B-XXX. Viton seals, external adjustment, 20-80 psi spring pressure. New, old stock. Length approx 5 3/4" Buy It Now - Free S...

Speedaire 30E653

• Manufacturer: Speedaire

Speedaire Coupler body 1/4 FNPT 30E653 Qty available: 12 | Width/dia: 0.25 Inches | Size: 1/4" FNPT

2004 T-M PC-26 #51353

• Manufacturer: T-M Vacuum Products

New – 2004 Serial No. 04.12951204.1 SPECIFICATIONS: Vacuum Pumping System…………23.2 cfm two-stage rotary vane mechanical pump package with electro-pneumatic valve EQUIPPED WITH: Alcatel R 151 B Pump Alcatel ACP 28 ...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Ross Mill Colloid ME-401

• Manufacturer: Ross
• Model: ME-401

Ross, model ME-40, 316 stainless steel, inline, high shear mixer. Equipped with 2½" ID stator, 1½" Tri-clamp infeed, 1" ID / 2" OD Tri-clamp discharge and powered by a 1½ hp drive. Rates dependant on materials, a...

Ross Mill Colloid HSM-410

• Manufacturer: Ross
• Model: HSM-410

Ross, model HSM-410, 304 stainless steel, inline, high shear mixer. Rated up to 240 GPM. Rates dependant on materials, application and machine configuration. Equipped with 2" Tri-clamp infeed, 2" Tri-clamp discha...

Feeder Auger 10 CU FT

10 cu ft, S/S, pre feeder with product trough, and dual feed screws. Has 4 1/2" flanged end bottom discharge with a 14" floor clearance, and a Reliance Electric 3/4 Hp AC motor drive, and mounted on (4) leg base ...