Used Gearboxes & Transmissions in Saxony, Germany

STOBER gearboxes

Gearboxes STÖBER DRIVE TECHNOLOGY K903SF0850MQ40 i = 84,810 Can be used left and right ! New !

NEUGART gearbox

Gearboxes, planetary gearboxes NEUGART PLE080-020 PLE080-020-SSSA3AE-E14/30/80/100/B5/M6 Input: Coupling for shaft diameter: Ø 19 mm, shaft length: 25 mm Bolt circle diameter: Ø 100 mm, 4x threaded hole: M6 x 1.0...

SEW gearbox

Gearbox SEW R43 1LC5063-2EC19Z/2LM1002/1NW/K31 i: 1 : 95,22 4x threaded bolt: M6 x 1.0, length: 18 mm used, tested !

SEW gearbox

Gearbox SEW i: 1 : 26.5 ( counted ) 4x threaded bolt: M8 x 1.25, length: 20 mm used, tested !

ALPHA gearbox

Gearboxes, angular gearboxes ALPHA SPK 100-MF3-140-020-000 1002.117060 Input: Coupling for shaft diameter: Ø 19 mm, shaft length: 38 mm Bolt circle diameter: Ø 70 mm, 4x threaded hole: M6 x 1.0, depth: 15 mm Outp...

SEW gearbox

Gearbox, 2 output shafts SEW K77 AD4 ( K77AD4 ) Gear ratio: 1 : 12.36 Input shaft: Shaft diameter: Ø 38 mm 2x shaft output: shaft diameter: Ø 50 mm used, tested !

SEW gearbox

Gearbox SEW FH97B/II2GD EDRN180L4/3D/TF/AL/C i: 1 : 11,16 Shaft length: 345 mm, with shaft end for shrink disk: Ø 95 mm Ex-protected ! New !

SEW gearbox

Gearbox SEW R73 LQ140/1 i: 1 : 29,89 Internal thread ( shaft ): M16 x 2.0, depth: 45 mm 4x threaded hole: M10 x 1.5, depth: 22 mm New, with documentation !

BAUER gearbox

Gearbox BAUER ESSLINGEN Reduction ratio: 1:23.7 Output shaft: Ø 65 mm, length: 140 mm, keyway width: 16 mm Input shaft: Ø 40 mm, length: 110 mm, keyway width: 12 mm Used, tested!

SEW gearbox

Gearbox SEW i = 40 ( counted, large gearwheel ) large gear wheel: Ø 52 mm, small gear wheel: Ø 33 mm 4x threaded bolts: M6 x 1.0, length: 15 mm Shaft output: Ø 20 mm, length: 40 mm, groove width: 6 mm New !

HIMMEL gearbox

Gearbox HIMMEL CAZ41- (M1-6) i = 184,49 Drive: Flange diameter ( inside / outside ): Ø 80 / 119 mm 4x stud bolts: M6 x 1.0, length: 18 mm Output: Hollow shaft diameter: Ø 30 mm, shaft length: 145 mm, groove width...

FIBRO gearbox

Gearbox FIBRO 54.57.4.0360 Input: Coupling for shaft diameter: Ø 19 mm, shaft length: 40 mm, groove width: 6 mm Bolt circle diameter: Ø 113 mm, 4x threaded hole: M8 x 1.25, depth 20 mm Output: Bevel gear, spiral ...

PAGUS gearbox

• Manufacturer: Pagus

Gearbox PAGUS Input: Shaft diameter ( outer / inner ): Ø 57 / 47 mm, shaft length ( inside ): 5 mm Bolt circle diameter ( shaft ): Ø 36 mm, 6x threaded hole: M6 x 1.0, depth: 14 mm Housing flange: Ø 100 mm, lengt...

TRM gearbox

TRM New ! Dimensions 530 x 300 x 300 mm Translation: i=104,41 | Mounting position: B5 | Shaft diameter: 55mm

SEW gearbox

Gear units, worm gear units SEW-EURODRIVE Type S47 LP80 ( S47LP80 ) input: Coupling for shaft diameter: Ø 19 mm, shaft length: 30 mm, slot width: 8 mm Bolt circle diameter: Ø 165 mm, 4x threaded hole: M10 x 1.5 O...