Matsui Ironworks HP-603
- Manufacturer: Matsui
-Blade height can be adjusted by either the blade gauge type for easy adjustment or the set screw type for more precise adjustment. Set screw type for more precise adjustment is available.
Kumagaya, Japan
Matsui Ironworks VC-350
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks ZC-300
- Manufacturer: Matsui
-Can be selected between 4' (12mm) and 5' (15mm) depending on the blade specifications. -The same thickness as the material to be installed is used as a ruler. The finish will be seamless. -Can be used for new co...
Kumagaya, Japan
Matsui Ironworks VC-300
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks VCR-3
- Manufacturer: Matsui
Power supply: Single phase 100V | Current: 15A | Power consumption: 1,430W | Mass: 10.5kg | Oil tank capacity: 65ml: 5m | Chain speed: 10.2 m/s (440 m/min) | Effective length of cut: 360mm
Kumagaya, Japan
Matsui Ironworks VC-100
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks KM-101 with 5-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Matsui Ironworks KM-101 with 3-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Tip: Enter manufacturer, model or keyword