SEMICONDUCTOR EQUIPMENT CORP VACUUM CHUCK WEST 6100
- Manufacturer: Semiconductor Equipment Corp.
SEMICONDUCTOR EQUIPMENT CORP VACUUM CHUCK WEST 6100 Please continue: PAYMENT OPTIONS: We accept PayPal, Company Check, Wire Transfers. TAXES & FEES: California Sales Tax applies if order within California at...
$899 USDCarpinteria, CA- Trusted Seller
Semitool 4400-S Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
The Semitool 4400 SRD is a Doublestack Spin Rinse Dryer (SRD) with 2 Process Chambers, fully refurbished to ‘Like New’ condition. Two redundant Head Assemblies ensure Uninterrupted Operation, allowing you to perf...
Rocklin, CA - Trusted Seller
8 Position Manifold for DI Water on SITEK & Semitool 260 & 270 SRDs
- Manufacturer: Semitool
This 8-position DI water manifold mounts to the top of Semitool 260 and 270 bowl assemblies on SITEK / Semitool / Rhetech Spin Rinse Dryers. 8 outlet positions for DI water flow Designed for 260 and 270 bowl conf...
Rocklin, CA - Trusted Seller
9 Position Manifold for DI Water on SITEK & Semitool 280 SRDs
- Manufacturer: Semitool
This 9-position DI water manifold is most commonly mounted to the top of Semitool 280 bowl assemblies on SITEK / Semitool / Rhetech Spin Rinse Dryers. 9 outlet positions for DI water delivery Typically used with ...
Rocklin, CA - Trusted Seller
Slinger Ring for SITEK & Semitool SRDs
- Manufacturer: Semitool
Slinger Ring for SITEK / Semitool / Rhetech Spin Rinse Dryer Slinger ring (also known as Sling Seal) is located directly behind the rotor drive plate. Past Possible Part Numbers: 03-230105 10776-501 SITEK Part Nu...
Rocklin, CA - Trusted Seller
Nylock Jam Nut for SITEK & Semitool SRDs
- Manufacturer: Semitool
This Nylock Jam Nut is designed to secure the rotor drive shaft in Semitool/Rhetech Spin Rinse Dryer (SRD) systems, ensuring stability and preventing loosening during operation. Size: 1/2-20 SITEK Part Number: 06...
Rocklin, CA - Trusted Seller
Brush for Brush Motors on SITEK & Semitool SRDs
- Manufacturer: Semitool
Brush for Pacific Scientific Motor, specifically designed for Semitool “ST” brush motors. Recommended purchasing a set of 2 for each motor rebuild. Ensures optimal motor performance and longevity. High-quality co...
Rocklin, CA - Trusted Seller
Spacer for RSP Assembly on SITEK & Semitool SRDs
- Manufacturer: Semitool
This spacer is designed for use in the Rotor Stop Positioner (RSP) assembly of SITEK / Semitool / Rhetech Spin Rinse Dryers, ensuring proper alignment and function during rotor indexing. SITEK Part Number: 06-003...
Rocklin, CA - Trusted Seller
Center Labyrinth Seal for SITEK & Semitool SRDs
- Manufacturer: Semitool
Labyrinth, Center Seal for SITEK / Semitool / Rhetech Spin Rinse Dryer This labyrinth center seal is ferrofluidic with a 1.970 O.D. It is also known as a Cartridge, Ferrofluid. Seal Detail: O-ring is located on t...
Rocklin, CA 
NATIONAL SEMICONDUCTOR LM20, LM70, LM74, LM83, LM87, LM92
- Manufacturer: National Semiconductor
INFORMATION NATIONAL SEMICONDUCTOR LM20, LM70, LM74, LM83, LM87, LM92 System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS:...
$25 USDSanta Barbara, CA- Trusted Seller
Motor Isolator for SITEK & Semitool SRDs
- Manufacturer: Semitool
Gray Motor Vibration Isolator, also called a Rubber Mount, used on SITEK, Semitool & Rhetech Spin Rinse Dryers. This natural rubber mount is designed for compression loads of 37 to 86 lbs. Thread Size: 5/16-18 SI...
Rocklin, CA - Trusted Seller
Motor Isolator for SITEK & Semitool SRDs
- Manufacturer: Semitool
Motor Vibration Isolator — also called a Grommet. Used on SITEK / Semitool / Rhetech Spin Rinse Dryers Natural rubber isolator: 1″ diameter x 1″ (2) 5/16-18 thread x 9/16″ long For compression loads: 37 to 86 lbs...
Rocklin, CA - Trusted Seller
N2 Distribution Manifold for SITEK & Semitool SRDs
- Manufacturer: Semitool
This N2 distribution manifold is used for the incoming nitrogen line on SITEK / Semitool / Rhetech Spin Rinse Dryers. Used on S, F, and ST models Mounts in the N2 supply line path Machined for clean and secure co...
Rocklin, CA - Trusted Seller
30 Slot Cam Assembly for SITEK & Semitool SRDs
- Manufacturer: Semitool
This 30-slot cam assembly is compatible with both brush and brushless motor configurations used in SITEK / Semitool / Rhetech Spin Rinse Dryers. It is used to control the indexing and rotor positioning during ope...
Rocklin, CA - Trusted Seller
Labyrinth Seal Retainer Cap for SITEK & Semitool SRDs
- Manufacturer: Semitool
This labyrinth-style cap seal retainer has a 1.5″ inner diameter and is used in SITEK / Semitool / Rhetech Spin Rinse Dryers. 1.5″ ID Labyrinth-style design for cap seal retention Compatible with S, F, and ST mod...
Rocklin, CA 
Tektronix 371 Test & Measurement (semiconductors)
- Manufacturer: Tektronix
- Model: 371
Good condition Tektronix 371 Test & Measurement (semiconductors)s. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword