Used Processing in Missouri, USA

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

Cartridge Filters

Cartridge filters, stainless steel. Quantity (2) - priced for the set

AC Compressor Corp D24JR

• Manufacturer: AC Compressor Corp

Inlet volume: 49,375 ACFM. Serial number 1634-11461. Rated speed: 6012 RPM, temperature: 217F, pressure: 15 PSIA. Discharge pressure: 22.9 PSIA. Removed, ready to load on your truck.

United Equipment Technologies XCEL 500

• Manufacturer: United Equipment Technologies

Right angle gearbox and motor, for top entering tank agitator. Model XCEL 500. Motor is 15 HP, 1800 rpm. United Equipment Technologies Corp. Includes Falk Right angle gear box. Output 47 rpm. This is gearb...

1995 Heat Exchanger, Plate ss 280 sf

• Manufacturer: APV - Gaulin

APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface area: 280 sq. ft. with 2" inlets/outlets. Includes 153 ss316 plates at 0.6mm thick. S/N 30326.1. Last used as a prod...

Votator 6x72

• Manufacturer: Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are ...

Filter Bag

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

1995 United Equipment Technologies XCEL 22

• Manufacturer: United Equipment Technologies

Gearbox and motor - inline. Was originally used for top entering agitator, United Equipment Technologies Model Xcel-22, S/N C1641-7B. Falk right angle gear box. Includes Motor 10HP, 1800 rpm. [Photos of sh...