Test, Lab, Medical equipment » Materials Testing » South Africa

Building Filters

Related Events

Live Now

Pharmaceutical Solid Dose & Semi-Solids Manufacturing & Packaging Facility

by Capital Recovery Group

Shreveport LA, USA
Ends Oct 23rd, 15:00 CDT
View event
271

Used Materials Testing in South Africa

  • RSI-ShearTrac-II (RSI-ShearTrac-II)

    RSI-ShearTrac-II (RSI-ShearTrac-II)

      Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

      Alberton, South Africa
    • Lower and Upper Platens (UTC-4511)

      Lower and Upper Platens (UTC-4511)

      • Manufacturer: Labequip

      Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...

      Alberton, South Africa
    • Beam Moulds (UTC-0830)

      Beam Moulds (UTC-0830)

      • Manufacturer: Labequip

      Hardened Concrete Testing Product Codes: Description: Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Due to the continuous development of our prod...

      Alberton, South Africa
    • Aggregate Crushing Value (ACV) Sets

      Aggregate Crushing Value (ACV) Sets (UTA-0630)

      • Manufacturer: Labequip

      Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...

      Alberton, South Africa
    • Digital Rebar Pull-Out Force Tester

      Digital Rebar Pull-Out Force Tester (UTC-3190)

      • Manufacturer: Labequip

      Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: Description: The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and...

      Alberton, South Africa
    • Poker Vibrator (UTC-0928)

      Poker Vibrator (UTC-0928)

      • Manufacturer: Labequip

      Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

      Alberton, South Africa
    • Concrete Pocket Penetrometer (UTC-0715)

      Concrete Pocket Penetrometer (UTC-0715)

        Fresh Concrete Testing Description: The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Stainless steel plunger has 32.3 mm² (1/20 in²) area and ...

        Alberton, South Africa
      • Cylinder Moulds (UTC-0842)

        Cylinder Moulds (UTC-0842)

        • Manufacturer: Labequip

        Hardened Concrete Testing Product Codes: Description: Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attac...

        Alberton, South Africa
      • Density (Unit Weight) Measure (UTC-0603E)

        Density (Unit Weight) Measure (UTC-0603E)

        • Manufacturer: Labequip

        Fresh Concrete Testing Product Codes: Description: Density (Unit Weight) Measures are used to determine the weight per cubic meter of freshly mixed and compacted concrete. Manufactured from heavy gauge steel comp...

        Alberton, South Africa
      • Cube Moulds (UTC-0810)

        Cube Moulds (UTC-0810)

        • Manufacturer: Labequip

        Hardened Concrete Testing Product Codes: Description: Cast iron and hard plastic moulds are manufactured in accordance with dimensions and tolerances stated in the relevant standard. Four-part body and attached t...

        Alberton, South Africa
      • Fundamentals of mechanical friction (TM200)

        Fundamentals of mechanical friction (TM200)

        • Manufacturer: Labequip

        stationary friction body, uniformly moving friction plate Description: The unit provides fundamental experiments on static and dynamic friction. Two solid bodies are moved against each other in a uniform manner. ...

        Alberton, South Africa
      • Length Change (Shrinkage And Expansion)

        Length Change (Shrinkage And Expansion) (UTCM-0029E)

        • Manufacturer: Labequip

        Physical and Chemical Properties Product Code: Description: The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened hydraulic cement mor...

        Alberton, South Africa
      • Small Curing Tanks (UTC-0965)

        Small Curing Tanks (UTC-0965)

        • Manufacturer: Labequip

        Hardened Concrete Testing Product Codes: Descriptions: The UTC-0965 Steel and UTC-0970 Polyurethane Small Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted to the ...

        Alberton, South Africa
      • Micro-Deval Apparatus ASTM (UTA-0620A-T)

        Micro-Deval Apparatus ASTM (UTA-0620A-T)

        • Manufacturer: Labequip

        Mechanical and Physical Properties Product Code: The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel jar stainless...

        Alberton, South Africa
      • Distance Pieces and Pedestal (UTC-4630)

        Distance Pieces and Pedestal (UTC-4630)

        • Manufacturer: UTEST

        Compression Testing Frames Product Code: Description: Distance pieces are used to reduce the amount of vertical clearance between the upper platen and the lower platen. For lowering the minimum distance between u...

        Alberton, South Africa
      1516171819

      Overview

      Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

      FAQ

      What should I consider when buying materials testing equipment?

      Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

      How do I ensure the materials testing equipment is shipped safely?

      Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

      What is the maintenance schedule for materials testing equipment?

      Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.