Building Filters
Vicat Test Sets (UTCM-0450E)
- Manufacturer: Labequip
Physical and Chemical Properties Product Code: The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method. UTCM-0458 Transfer Dish which is used as a Water Wess...
Alberton, South Africa
Plate Loading Test Set (UTS-1101)
- Manufacturer: Labequip
Compacted Road Base and Sub-base Soils Product Code: Description: Plate load test sets can be used to determine the ultimate bearing capacity of subgrade soils and compacted pavement components. Plate load tests ...
Alberton, South Africa
Plastic Limit Test Set (UTS-0250B.E)
- Manufacturer: UTEST
Soil Classification The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking. The Plastic Limit ...
Alberton, South Africa
Sand Equivalent Test Sets (UTA-0500E)
General and Geometric Properties Product Code: The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon as...
Alberton, South Africa
Grout Flow Cone Test Sets (UTCM-0720A)
- Manufacturer: Labequip
Compression and Flexural Machines Product Code: Description: UTCM-0720A and 0730A Flow Cone Test Sets are used for determining the flow properties of grouts, mortars, muds and other fluid materials. The Flow Cone...
Alberton, South Africa
Slump Test Set, ASTM (UTC-0400A)
- Manufacturer: Labequip
Fresh Concrete Testing Product Codes: Description: The Slump test method is used for the determination of the consistency and workability of fresh concrete. UTC-0406A Slump Cone Funnel, made of seamless spun stee...
Alberton, South Africa
Slump Test Set, EN (UTC-0400E)
- Manufacturer: Labequip
Fresh Concrete Testing Product Codes: Description: The Slump test method is used for the determination of the consistency and workability of fresh concrete. The UTC-0400E Slump Test Set is supplied galvanized to ...
Alberton, South Africa
Concrete Flow Table Test Set (UTC-0510)
- Manufacturer: Labequip
Fresh Concrete Testing Product Codes: Description: The test set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen after working on a fl...
Alberton, South Africa
Carbonation Test Set (UTC-3160)
- Manufacturer: UTEST
Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: This simple test set is used for determination of carbonation depth of the carbonated layer near the surface of hardened c...
Alberton, South Africa
Relative Density Test Set (UTS-0670A-C)
- Manufacturer: Labequip
Compacted Road Base and Subbase Soils Product Codes: Relative Density Test Set ASTM is used for the determination of the relative density of cohesionless soil for which impact compaction will not produce a well-d...
Alberton, South Africa
Sand Cone Sets (UTS-0950)
- Manufacturer: UTEST
Compacted Road Base and Sub-base Soils Product Code: Description: The UTS-0950 and UTS-0960 Sand Cone Sets are used for the determination of the degree of compaction on site. UTS-0950 includes double cone, plasti...
Alberton, South Africa
Falling Head Permeability Set (UTS-1320)
- Manufacturer: Labequip
Soil Permeability & Dispersibility Product Code: Description: The UTS-1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly fine-grained soils such as clay-like or silty soils, w...
Alberton, South Africa
Aggregate Crushing Value (ACV) Sets (UTA-0630)
- Manufacturer: Labequip
Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...
Alberton, South Africa
Constant Head Permeability Set, BS (UTS-1300B)
- Manufacturer: Labequip
Soil Permeability & Dispersibility Product Code: Description: The UTS-1300B and UTS-1301B Constant Head Permeability Set are used to study the behaviour of soil, relatively coarse-grained soil such as sands and g...
Alberton, South Africa
Flakiness Index Sieve Sets BS (UTA-0410)
- Manufacturer: Labequip
General and Geometric Properties Product Code: Description: Aggregate particles are considered as flaky when their thickness is less than 0.6 of their mean sieve sizes. Aggregate to be classified is separated int...
Alberton, South Africa