Test, Lab, Medical equipment » Materials Testing » Gauteng

Building Filters

270

Used Materials Testing in Gauteng, South Africa

  • Automatic Vicat Apparatus (UTCM-0550E)

    Automatic Vicat Apparatus (UTCM-0550E)

      Physical and Chemical Properties Product Code: The setting time determination of cement/mortar/gypsum is one of the most important parameters for the quality inspection and verification. The machine is based on t...

      Alberton, South Africa
    • Solid Mould (UTCM-0670)

      Solid Mould (UTCM-0670)

      • Manufacturer: Labequip

      Compression and Flexural Machines The UTCM-0670 Solid Mould is used to determine the water retention of masonry cement specimens. Due to the continuous development of our products, the goods supplied may vary in ...

      Alberton, South Africa
    • Beam on two supports: shear

      Beam on two supports: shear force diagram (WP961)

      • Manufacturer: Labequip

      application of the method of sections to determine the shear force Description: WP 961consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point ther...

      Alberton, South Africa
    • Melting Pot (UTC-1070)

      Melting Pot (UTC-1070)

      • Manufacturer: Labequip

      Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...

      Alberton, South Africa
    • TRL DCP – DYNAMIC CONE

      TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)

        The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...

        Alberton, South Africa
      • Displacement Transducers & Dial Gauges

        Displacement Transducers & Dial Gauges (UTGM-0060)

        • Manufacturer: Labequip

        Measuring Instruments Product Codes: Description: Linear Potentiometric Displacement Transducer (LPDT) provides an electric signal proportional to the linear shaft displacement. UTEST supplies high quality Linear...

        Alberton, South Africa
      • Vebe Consistometer (UTC-0560E)

        Vebe Consistometer (UTC-0560E)

          Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

          Alberton, South Africa
        • FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac

          FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

          • Manufacturer: Labequip

          Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

          Alberton, South Africa
        • RSI-ShearTrac-II (RSI-ShearTrac-II)

          RSI-ShearTrac-II (RSI-ShearTrac-II)

            Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

            Alberton, South Africa
          • Lower and Upper Platens (UTC-4511)

            Lower and Upper Platens (UTC-4511)

            • Manufacturer: Labequip

            Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...

            Alberton, South Africa
          • FULLY AUTOMATED CONSOLIDATION & SWELL

            FULLY AUTOMATED CONSOLIDATION & SWELL SYSTEM (LoadTrac III (Mini-LoadTrac)

            • Manufacturer: Geocomp Corp.

            Advanced Soil Systems ASTM D-2435 Incremental Consolidation AASHTO T-216 Incremental Consolidation ASTM D-4546 One dimensional swell or settlement potential of cohesive soils LoadTrac III system for incremental c...

            Alberton, South Africa
          • Beam Moulds (UTC-0830)

            Beam Moulds (UTC-0830)

            • Manufacturer: Labequip

            Hardened Concrete Testing Product Codes: Description: Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Due to the continuous development of our prod...

            Alberton, South Africa
          • Aggregate Crushing Value (ACV) Sets

            Aggregate Crushing Value (ACV) Sets (UTA-0630)

            • Manufacturer: Labequip

            Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...

            Alberton, South Africa
          • Digital Rebar Pull-Out Force Tester

            Digital Rebar Pull-Out Force Tester (UTC-3190)

            • Manufacturer: Labequip

            Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: Description: The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and...

            Alberton, South Africa
          • Poker Vibrator (UTC-0928)

            Poker Vibrator (UTC-0928)

            • Manufacturer: Labequip

            Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

            Alberton, South Africa
          1415161718

          Overview

          Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

          FAQ

          What should I consider when buying materials testing equipment?

          Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

          How do I ensure the materials testing equipment is shipped safely?

          Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

          What is the maintenance schedule for materials testing equipment?

          Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.