Building Filters
- Trusted Seller
BOHLE HS 1000 SLIMLINE Lifting device for container and drum
- Manufacturer: LB Bohle
• Slim design (space requirement only 0.3 square metres) with electromechanical lift drive• Permissible load 1,000 kg• Lift mast with floor and ceiling bearing (included in scope of delivery)• Overall height 3,70...
Stapelfeld, Germany - Trusted Seller
BOHLE HS 1000 SLIMLINE Lifting device for container and drum
- Manufacturer: LB Bohle
• cf1Slim design (space requirement only 0.3 square metres) with electromechanical lift drive• Permissible load 1,000 kg• Lift mast with floor and ceiling bearing (included in scope of delivery)• Overall height 3...
Stapelfeld, Germany 
Enercon E-40 6.44 600 kW cable winch Planeta, 2-3038 / 326
- Manufacturer: Planeta
Fully functional, converted from an Enercon E-40 6.44 76 m steel tower, Item No.: 2-3038 / 326 Compatible with Enercon wind turbines Storage location: KSR Warehouse, 25840 Friedrichstadt Available immediately Pri...
Friedrichstadt, Germany- Trusted Seller
CAB MINILIFT 70 Mobile lifter
- Manufacturer: CAB
• Load capacity 70 kg• Fork mount with rectangular tubes, tube centre distance 368 mm, tube length 435 mm• Lifting height max. 1,540 mm (floor to lower edge of tube)• Parking brake• Mobile• Next VDE test 03/25• E...
Stapelfeld, Germany - Trusted Seller
OCS EC Belt check weigher
- Manufacturer: OCS
• Weighing range max. 750 g• d=0.05 g• e=0.1 g• Load cell EC 2000• Belt run from left to right• Belt width 145 mm• Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm• Bad ejection by blowing n...
Stapelfeld, Germany - Trusted Seller
OCS HC-2000-2 Belt check weigher
- Manufacturer: OCS
• Weighing range max. 750 g• d=0.05 g• e=0.1 g• Load cell EC 2000• Belt run from left to right• Belt width 145 mm• Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm• Bad ejection through pneu...
Stapelfeld, Germany - Trusted Seller
OCS EC Belt checkweigher
- Manufacturer: OCS
• Weighing range max. 750 g• d=0.05 g• e=0.1 g• Load cell EC 2000• Belt run from left to right• Belt width 190 mm• Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm• Bad ejection by pneum. ej...
Stapelfeld, Germany - Trusted Seller
OCS CHECKWEIGHERS GMBH HC-IS-D Continuous checkweigher for container with coding station
- Manufacturer: OCS Checkweighers GmbH
Continuous checkweigher:• Specially set up for aerosol cans/bottles Ø 23 mm• Belt run from right to left• Load cell SW-D-FS• Passage with cycle star for object Ø 23 mm• Weighing range 0.1 - 500 g• Capacity max. 1...
Stapelfeld, Germany 
1994 Still R70-30T
- Manufacturer: Still
- Model: R70-30T
- Horsepower: 50 hp
- Hours: 6,678 h
Ein STILL R70-30 Treibgas Gabelstapler Hersteller: STILL Model: R70-30 Typ: R70 Antriebsart: Treibgas / LPG Nenn-Antriebsleistung 2x5 kW Betriebsstunden: 6678 Std Tragkraft 3000 Kg bei 500mm LSP Teleskop Hubger...
2002 Linde H25D 392
- Manufacturer: Linde
- Model: H25D-392
- Horsepower: 44 hp
- Hours: 4,147 h
Ein Linde H25D 392 Diesel Frontstapler aus 2002 mit 4147 Betriebsstunden Wartung und UVV Neu ! Sitzkissen wird erneuert ! Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer ! Brutto 11.900,00€ inkl. ...
2007 Still RX70-22
- Manufacturer: Still
- Model: RX 70-22
- Horsepower: 40 hp
- Hours: 8,688 h
Ein STILL RX70-22 Diesel Frontstapler aus 2007 mit 8869 Betriebestunden Hersteller: STILL Model: RX70-22 Typ: RX Antriebsart: Diesel Nenn-Antriebsleistung Volkswagen AG 30 kW Betriebsstunden: 8869 Std Fahrbetäti...
1998 Kalmar AT 700E/60-02
- Manufacturer: Kalmar
- Hours: 1,349 h
- Lifting capacity: 6,000 kg
3. Valve 4. Valve Work light rear Front windshield Half cabin Refresh Image
2020 Still RX20-20P
- Manufacturer: Still
- Model: RX 20-20P
- Horsepower: 17 hp
- Hours: 8,751 h
Ein STILL RX20-20P aus 2020 mit 8751 Betriebsstunden Hersteller: STILL Model: RX20-20P Typ: RX20 Antriebsart: Elektro Nenn-Antriebsleistung 13kW Betriebsstunden: 8751 Std Antriebsbatterie GNB Imdustrial Power T...
2018 Still RX20-18
- Manufacturer: Still
- Model: RX 20-18
- Horsepower: 15 hp
- Hours: 3,078 h
Ein STILL RX20-18 Elektro 3-Rad Gabelstapler aus 2018 Sie erhalten eine Rechnung inklusive 19% MwSt. Netto exclusiv 19% MwSt. 10.500,00€ Hersteller: STILL Model: RX20 Typ: RX-18 Antriebsart: Elektro Nenn-Antrie...
2013 Still RX60-35
- Manufacturer: Still
- Model: RX 60-35
- Horsepower: 20 hp
- Hours: 5,321 h
Ein STILL RX60-35 mit 5321 Betriebsstunden Hersteller: STILL Model: RX60-35 Typ: RX60 Antriebsart: Elektro Nenn-Antriebsleistung 15kW Betriebsstunden: 6043 Std Fahrbetätigung: Vorwärts / Rückwärts /1.Pedal Hydr...