Material handling » Material Handlers » Pennsylvania

Search By Manufacturer

Building Filters

33

Used Material Handlers in Pennsylvania, USA

  • Trusted Seller
    Blend C022

    Blend C022

    • Manufacturer: Blend

    The Blend C022 live bottom material carrier is designed for horizontal unloading without tipping or unloading from one truck to another. It can carry many different types of material. ADVANTAGES • Increased load ...

    Shinglehouse, PA
  • Trusted Seller
    Blend C019

    Blend C019

    • Manufacturer: Blend

    The Blend C019 live bottom material carrier is designed for horizontal unloading without tipping or unloading from one truck to another. It can carry many different types of material. ADVANTAGES • Increased load ...

    Shinglehouse, PA
  • Trusted Seller
    2005 Komatsu 3,000

    2005 Komatsu 3,000

    • Manufacturer: Komatsu

    Please call with any questions, (410) 216-3949, Se Habla Español.

    Harrisburg, PA
  • Trusted Seller
    McLanahan 42″ Primary Sweep Belt

    McLanahan 42″ Primary Sweep Belt Sampler

    • Manufacturer: McLanahan

    McLanahan 42″ Primary Sweep Belt Sampler Call for information.

    New Stanton, PA
  • Trusted Seller
    Komatsu PC138 with SAS Extreme

    Komatsu PC138 with SAS Extreme Auto Dismantler

    • Manufacturer: Komatsu

    New hydraulic hoses just installed Komatsu PC 138 with SAS Extreme SAS Extreme Good working machine Replaced Hydraulic hoses within the last month Start processing today! Seller must approve Buyer in Greater Phil...

    $135,000 USD

    Get financing

    Est. $2,541/mo

    Pennsylvania, USA
  • Trusted Seller
    2009 FUCHS MHL 350

    2009 FUCHS MHL 350

    • Manufacturer: Fuchs
    • Model: MHL 350

    2009 Fuchs MHL 350 Material Handler- 199 Horsepower Deutz Diesel Engine, 11,619 Hours, Hydraulic Elevated Cab, Auto Lube Greasing System, Heat & A/C, 50' Reach, Solid 12.00-20 Tires, Generator, **Comes w/ HGT 5-T...

    $96,000 USD

    Get financing

    Est. $1,807/mo

    Pennsylvania, USA
  • 1964 200 TON (181 MT)

    1964 200 TON (181 MT) NATIONAL MOTORIZED INGOT STEEL MILL TRANSFER CAR

    • Manufacturer: NATIONAL STEEL CAR CORP.

    Inventory id: 10754500000 | Capacity: 200 | Previous use: INGOTS | Motorized/non-motorized: MOTORIZED | Wheel size (dia): 28 | Track gauge: 4' 8-1/2" | Car speed: 210 | Drive motor hp: 19 | Drive motor rpm: 560 ...

    Pittsburgh, PA
  • 5 TON TEREX STEEL MILL

    5 TON TEREX STEEL MILL TRANSFER CAR

    • Manufacturer: Terex
    • Overall Width: 72 m

    Inventory id: 20034500000 | Quantity on web: 1 | Capacity: 5 | Previous use: MATERIAL HANDLING | Motorized/non-motorized: NON-MOTORIZED | Car deck description: HARDWOOD - FLATBED | Wheel size (dia): 13 | Overall...

    Pittsburgh, PA
  • 1964 200 TON (181 MT)

    1964 200 TON (181 MT) NATIONAL MOTORIZED INGOT STEEL MILL TRANSFER CAR

    • Manufacturer: NATIONAL STEEL CAR CORP.

    Inventory id: 10754400000 | Capacity: 200 | Previous use: INGOTS | Motorized/non-motorized: MOTORIZED | Wheel size (dia): 28 | Track gauge: 4' 8-1/2" | Car speed: 210 | Drive motor hp: 19 | Drive motor rpm: 560 ...

    Pittsburgh, PA
  • 1997 150 TON (136 MT)

    1997 150 TON (136 MT) BOLTECH MOTORIZED LADLE STEEL MILL TRANSFER CAR

    • Manufacturer: Boltech
    • Overall Width: 188 m

    Inventory id: 10785400000 | Capacity: 150 | Previous use: LADLE | Motorized/non-motorized: MOTORIZED | Wheel size (dia): 33" Diameter X 4 3/4" groove on wheel; Timken AP Bearings | Track gauge: 13' 1-1/2" | Car ...

    Pittsburgh, PA
  • Trusted Seller
    1999 FUCHS MHL360

    1999 FUCHS MHL360

    • Manufacturer: Fuchs
    • Model: MHL 360
    • Operating weight: 36,000 kg

    1999 Fuchs MHL360 Material Handler- **RUNS & OPERATES** 226 HP Deutz WDZXL071003 Diesel, 8,860 Hrs., EROPS, Operating Weight- 107,584 w/ out Attachments, 50' of Reach, **Brand NEW Bottom End From Deutz 3/2020, Ma...

    $38,000 USD

    Get financing

    Est. $715/mo

    Wind Gap, PA
  • Trusted Seller
    Dual Hydraulic Tilt Table ;

    Dual Hydraulic Tilt Table ; 40" X 27" / 39" X 41" Tables 40/39W

    • Manufacturer: Unbranded

    “UNTESTED. SEE PICTURES FOR CONDITION.” Dual Hydraulic Tilt Table ; 40" X 27" / 39" X 41" Tables 40/39W Dual Hydraulic Tilt Table ; 40" X 27" / 39" X 41" Tables 40/39W THIS TABLE TILTS OUTWARDS. 13″ HEIGHT TO TAB...

    $2,500 USD
    Fleetwood, PA
  • Trusted Seller
    Serco HRL HYDRAULIC RAIL DOCK

    Serco HRL HYDRAULIC RAIL DOCK LEVELER

    • Manufacturer: Serco

    “Used, in nice condition. Was in working condition when taken out of service. There is two of these units. But you are only buying one.” Serco HRL HYDRAULIC RAIL DOCK LEVELER Serco HRL HYDRAULIC RAIL DOCK LEVELER...

    $7,500 USD

    Get financing

    Est. $147/mo

    Fleetwood, PA
  • Trusted Seller
    Presto 43-5/8" Pneumatic Airbag Load

    Presto 43-5/8" Pneumatic Airbag Load Leveler / Pallet Positioner 65-126PSI

    • Manufacturer: Presto

    “UNTESTED.” Presto 43-5/8" Pneumatic Airbag Load Leveler / Pallet Positioner 65-126PSI Presto 43-5/8" Pneumatic Airbag Load Leveler / Pallet Positioner 65-126PSI HAS A 32″ MAX HEIGHT 2000lb CAPACITY (MAYBE MORE, ...

    $1,400 USD
    Fleetwood, PA
  • 2008 FUCHS MHL340D

    2008 FUCHS MHL340D

    • Manufacturer: Fuchs
    • Model: MHL 340
    • Operating weight: 28,000 kg

    2008 Fuchs MHL340D with 8,150 hours, 45’ reach, hydraulic elevating cab, 13 KW gen-set, rotating grapple, A/C and solid tires FOB McVeytown, PA 44

    Lewistown, PA
  • no-image_en.png

    Fuchs MHL 335 Material Handler

    • Manufacturer: Fuchs
    • Model: MHL 335

    Good condition Fuchs MHL 335 Material Handlers available between 2008 and 2014 years. Located in USA and other countries. Click request price for more information.

    USA
123

Overview

Material handlers are specialized machines designed for moving, sorting, and loading various materials in industrial settings. They come with features like long arms, clamshell buckets, and grapples, making them ideal for handling bulk materials such as scrap metal, waste, and logs efficiently and safely.

FAQ

What should I look for when buying a used material handler?

Check the machine's operating hours, overall condition, and any signs of wear or damage. Ensure it has been well-maintained with a complete service history.

How can I arrange the shipping of a material handler?

Use a specialized heavy equipment transport service. Make sure the handler is properly secured and protected during transit to avoid any damage.

What regular maintenance does a material handler require?

Regular maintenance includes inspecting hydraulic systems, checking fluid levels, lubricating moving parts, and ensuring the machine's structural integrity. Follow the manufacturer's maintenance schedule for best results.