Used in Occitanie, France

Demolition shears for 1T to 4T

Hydraulic demolition shears with 360° rotation for mini excavators from 1 to 4 tons Cuts concrete, metal, and steel Model: HMC1.4 Rotation: gr30 Flow rate: 20-40 l/min Pressure: 250-280 bar Weight: 175 kg Opening...

Round bale clamp for Merlo

• Manufacturer: Merlo

Bale spike / bale spike for Merlo telescopic handler Brand: TREEMME / MERLO Model: A2407 Weight: 120 kg Maximum load: 1.2 t VAT recoverable Shipping possible to France, Corsica, and Europe

BRH for mini-excavator from 0.8T to 2.5T

New hydraulic rock breaker for excavators ranging from 0.8 tons to 2.5 tons. Model: TPZ100 Weight: 73 kg Maximum pressure: 90 - 120 bar Oil flow: 15 - 30 L/min Joules: 160 This hammer is sold with two new picks, ...

Brh for excavator from 4T to 9T

New hydraulic rock breaker for 4-ton to 9-ton mini excavators Model: Haner hx700 Weight: 320 kg Maximum pressure: 108 - 137 bar Oil flow: 40 - 70 L/min Bpm: 500-900 Screwdriver mounting possible (ACB MORIN, KLAC,...

BRH / hydraulic hammer for BOBCAT

• Manufacturer: Bobcat

BRH HYDRAULIC HAMMER For Bobcat Mustang Takeuchi mini loaders With hoses and push-pull Returns available for Montabert, Furukawa, Socomec, Atlas Copco, and NPK mini excavators Several identical models in stock Pr...

Stump grinder for loader

Stump grinder / nibbler for Bobcat and skid steer loaders Brand: Bobcat Model: SG60 grinder In stock VAT recoverable Shipping available to France, Corsica, and Europe

BRH for excavator from 11T to 16T

New hydraulic rock breaker for excavators ranging from 11 tons to 16 tons Model: TPZ700 Weight: 890 kg Maximum pressure: 150 - 170 bar Oil flow: 80 - 110 L/min Joules: 1770 This breaker is sold with two new picks...

IMER electric material saw

• Manufacturer: Imer

Imer saw Single-phase motor power 230V / 50Hz 2.2kW / 3 hp Weight: 202 kg MASONRY 750 PLUS Technical data sheet photo no. 6 Shipping possible to France, Corsica, and Europe VAT recoverable

Log splitter for excavator from 3T to 7T

HANER HKS180 Log Splitter / Wood Auger For mini excavators from 3 to 7 tons Operating pressure: 100-170 bar Oil flow: 50-95 l/min Force: 1878 Nm Revolutions/min: 32 - 97 Log diameter: 500 mm (max) Weight: 96 kg C...

2017 Gehl 3840

• Manufacturer: Gehl
• Model: 3840

Gehl Mini Wheel Loader Model: 3840 Year: 2017 Hours: 1452 Weight: 2T Hydraulic Line Work Light Sold with Excavator Bucket VAT Recoverable Price sold as is: €17,900 excluding VAT Price sold overhauled, engine drai...

Scarifier for mini loader

Scarifier for skid steer loaders Attachment: Bobcat, Takeuchi, Komatsu, Newholland, Caterpillar, Gehl, Mustang, Case, etc. Width: 1.50 m Tine length: 20 cm VAT recoverable Shipping available to France, Corsica, a...

2018 Toyota Tonero 35 à 19900 Euros HT

• Manufacturer: Toyota
• Hours: 4,528 hour

Forklift Make: TOYOTA Model: 8FGF35 Tonéro 35 Gas Mast: Triplex Capacity: 3.5T Lifting Height: 6M Free Lift Up to 2.40M Mast Height: 3.10M Fork Positioner Side Shifter 2 Gas Cylinders Additional Photos Upon Reque...

Hydraulic auger for mini excavator 0.5T to 2T

Hydraulic auger for mini excavators from 0.5 to 2.5 tons For mini excavators from 0.5 to 1.5 tons = €1,500 excluding VAT For mini excavators from 1.5 to 2.5 tons = €1,900 excluding VAT 1 drill bit included Mounti...

Brh for miniloader

Hydraulic hammer for mini loader type Bobcat Mustang Takeuchi Hoses included Model: HANER HGS68 Weight: 500 kg Oil flow: 40 - 70 L/min Pressure: 88 - 117 bar Several models in stock Price excluding VAT: €5,500 VA...

2019 Ausa D100AHG. - Girabenne

• Manufacturer: Ausa
• Model: D100AHG
• Load capacity: 1,000 kilogram

Ausa Gira tipper Dumper type D100 AHG 4x4 Year: 02/2019 Payload: 1T Total width < 1M 3-cylinder Kubota engine Transmission: hydrostatic 4-wheel drive Joystick Folding roll bar Price sold as is: €13,500 excluding ...