Used rollers

ANDERSON COOK 350S

• Manufacturer: Anderson-Cook
• Model: 350S

Specifications: Maximum Working Stroke: 55" Typical Rack Width: Up to 8" Wide Machine Daylight Opening: 9.5" Machine Power Rating: 125 HP Typical Forming Rack Setup(s): Single 13" Forming Rack Single 24" Formi...

2008 JM1 PRODUCTION OF BUSHES AND ROLLERS

Equipped With Working range: Bushes or rollers with strip width: 10-40mm Tensile strength at max. strip cross section N/mm2: 500

GMC MACHINE TOOLS PRB-75H

• Manufacturer: GMC
• Model: PRB-75

GMC PRB-75H Power Ring and Angle Roll Bender has a Max capacity 4 inch tube, 3-1/2 inch pipe and 3 inch square tube.Hydraulic top roller positioning with digital readout. Heavy Duty 5-1/2HP AC main motor.Heavy w...

PROFAB Model 3622, Model 3616, Model 4816

• Manufacturer: PROFAB

Looking for a manual slip roller? Look no further than the PROFAB Manual Slip Rollers! Model 3622 – 36″ long, 22 ga., 2″ roll diameter The manual slip roller features manual adjust on forming roll with two knobs!

WEBB 450 #85615

• Manufacturer: Webb
• Model: 450

Equipped With: * Squirrel cage main drive * Motor with magnetic brake * Overload and under-voltage protection on main drive motor * Full length safety treadles across front and back of machine for emergency stopp...

2014 AKYAPAK AKS 30/35, 1-3/4" x 10' with supports

• Manufacturer: Akyapak

4 Rolls, Double Initial Pinch Capacity: 10‘ Machine Location: Little Rock, AR Length of Rolls 10′ Max Thickness 1.75″ Number of Rolls 4 Hydraulic Equipped with: Side supports Over head Supports Power 60 hp

2008 OMEGA 10' x 1/4" Tauring Plate Roller

• Manufacturer: Tauring

Type: Hydraulics | Capacity: 10' x 1/4" | Diameter of roles: Sup. 9.5" | Type of rolling: Double Initial | Voltage / phases: 220 / 3 | Weight: 15,400kg | Dimensions: 58" x 220" x 67"

Durma Plate Roller HRB-4-30220 10' x 1/4"

• Manufacturer: Durma - Durmazlar
• Model: HRB-4

Type: Hydraulics | Capacity: 10' x 1/4" | Roles: 4 | Diameter of roles: Sup. 8" Lat. 7.48" | #!: 10 | Voltage: 220 - 400 | Weight: 5,900kg | Dimensions: 60" x 210" x 49"

2018 WEST MICHIGAN SPLINE 24

• Manufacturer: West Michigan Spline

"Fantastic deal on a 2018 WEST MICHIGAN Model 24 Spline Roller! Silverlight CNC, Inc is selling this reliable used equipment, featuring a 24" rack size, 1.5" OD, and maximum rack box depth of 5.0". With under arm...

Tennsmith Manual Slip Rolls

• Manufacturer: Tennsmith

Product Description TENNSMITH slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel base to make an accurate and durable forming...

PROFAB Model X514HPR Hydraulic Bending Roll Machines

60″ – 14 gauge capacity 3 3/4″ diameter rolls Power adjust of forming roll Manual adjust pinch roll (1 hand) Hydraulic pump / motor driven Forward / reverse foot pedal L.E.D. form roll indicator Wire grooves (1/4...

Tin Knocker 3 ft Manual Slip Roll

• Manufacturer: Tin Knocker

Here’s the beef! Tin Knocker rolls are among the strongest in the industry. Optional Stand $165 Available from a distributor near you. Normally in stock in one of our warehouses. Precision machined and ground fro...

PROFAB Model X510HPR Hydraulic Bending Roll Machines

• Manufacturer: PROFAB

Product Description The PROFAB X510HPR hydraulic powered bending and roll machine features: 60″ – 10 gauge capacity 4 3/4″ diameter rolls Power adjust of forming roll Power tilt adjust for cones Manual adjust pin...

PROFAB Model 5016E Power Slip Roll

Need a powered slip roll? Check out the Model 5016E by PROFAB. 50″ wide 16 ga capacity 3″ diameter roll Wire grooves (1/4″, 3/8″, 1/2″) Safety trip/wire on both sides of machine 220V Single Phase Power