Used applicators in Bavaria, Germany

Merkle M 254 K

• Manufacturer: Merkle
• Amperage: 16 ampere

The Merkle M 254 K is a MIG/MAG welding machine that is characterized by its robust design and reliable performance. With a welding current range of 25 to 250 amps and a duty cycle of 60 % at 250 A, this device i...

BOGE SD15 screw compressor + Hankinson refrigeration dryer + compressed air receiver

• Manufacturer: Boge

Manufacturer: BOGE Kompressoren GmbH & Co. KG Model: SD 15 (with integrated Trinity control system) Compressor Type: Oil-injected Screw Compressor Air Dryer: Hankison HD220CE-G Air Receiver Tank: 750 L (manufactu...

OPTImill MB 4P

The compact OPTImill MB 4 P drilling and milling machine is a cost-effective, CE-compliant solution for machining very small parts with a wide range of possible applications. A pre-installed X-axis feed, digital ...

Rotoland Kleinsamenstreuer RS

• Manufacturer: Rotoland

Global Shovel 1.60/1.85/2.10

________ Stoll Global Light Material Bucket Available in: 1.60 m heaped capacity: 0.52 cubic meters, net weight: 109 kg 1.85 m heaped capacity: 0.61 cubic meters, net weight: 131 kg 2.10 m heaped capacity: 0.70 c...

Horizon AFC-566FKT

• Manufacturer: Horizon
• Model: AFC-566FKT
• Maximum sheet size: 558 mm × 850 mm

Machine data: Fully automatic combination folder (KTL type) Folding units: 6 parallel buckle plates 2 knife folding units 1 cross-fold knife unit (rotatable) Setup Feeder system: Pile feeder with suction head Del...

OPTIturn TM 3310 D

• Spindle bore: 38 millimeter

The OPTIturn TM 3310 D conventional center lathe is an inexpensive new machine for flexible applications. A machine which, in addition to the CE declaration of conformity, also meets all requirements with regard ...

OPTIturn TM 4010 D

• Spindle bore: 52 millimeter

The OPTIturn TM 4010 D conventional center lathe is an inexpensive new machine for flexible applications. A machine which, in addition to the CE declaration of conformity, also fulfills all requirements with rega...

OPTIturn TH 4210

• Spindle bore: 52 millimeter

The OPTIturn TH 4210 conventional center lathe is a cost-effective new machine for flexible areas of application. A machine which, in addition to the CE declaration of conformity, also fulfills all requirements w...

2011 BD FACSAria + FACSAria II Fluidics Cart

• Manufacturer: BD

The BD FACSAria is a high-performance flow cytometer and cell sorter that combines advanced optics, powerful fluidics, and intuitive software to enable precise, high-speed sorting of even rare cell populations. W...

AGRAFIX Stitching Machine

• Manufacturer: Agrafix

Manufacturer: AGRAFIX Type: Floor-standing wire stitcher Year of Manufacture: Unknown (likely 1960s-1980s) Status: Available Condition: Used, good Available from: Immediately Machine data: Stapling type: Flat sti...

Stator winding machine

• Manufacturer: RUFF

Discover the optimal solution for precise winding of medium and large stator sizes - our advanced stator winding machine. Specially designed for demanding applications for medium to large stator windings and prec...

OPTIturn TZ 4 V

• Spindle bore: 52 millimeter

The OPTIturn TZ 4 V conventional center lathe is a precise new machine that impresses with its good price-performance ratio and is suitable for flexible areas of application. A machine which, in addition to the C...

OPTIturn TZ 4

• Spindle bore: 52 millimeter

The OPTIturn TZ 4 conventional center lathe is a precise new machine that impresses with its good price-performance ratio and is suitable for flexible areas of application. A machine which, in addition to the CE ...

ROHDE Toploader BT 500

• Manufacturer: BT

The BT 500 Rectangular Toploader has a volume of 500 litres and is a kiln from the BT series suitable for temperatures to 1300°C. The BT series combines 5-side heating in a robust frontloader construction with al...