Used Machine Tools in Saxony, Germany

POREBA Luenette

• Manufacturer: Poreba

Luenette, bezel, setting stick POREBA suitable for Poreba TPK-80 ! used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...