Awara, Japan
Makita HM0810
- Manufacturer: Makita
- Model: HM0810
Voltage: single-phase 100V, current: 11A, frequency: 50–60Hz,\n power consumption: 1050W, overall length: 410mm, weight: 5.3kg
Awara, Japan
Tokigawa, Japan
Awara, Japan
Makita CE001GZN
- Manufacturer: Makita
Power and high speed cutting exceeding engine type. Blade diameter 355mm Maximum depth of cut 127mm Wrench 13-19, coupling sleeve, ring 20 (OD Φ22) Φ25.4 Φ30.5) This product is This product is the main body only....
$864 USDKumagaya, Japan
Makita 5803BLA
- Manufacturer: Makita
Power consumption: 1050w, RPM: 4500min, Saw blade size: outer diameter φ190 × inner diameter φ20, Maximum cutting depth (90 degrees/30 degrees): 69/58mm, Tilt cutting: 0–30mm, Le...
Awara, Japan
Makita JR3030T
- Manufacturer: Makita
Stroke length: 28mm, stroke count: 0–2600 min, Overall length: 460mm, net weight: 3.5kg
Awara, Japan
Makita WS141
- Manufacturer: マキタ
- Amperage: 130 A
Engine welder Makita WS141 engine welder. It is a popular machine that can both weld and generate electricity. It is in good condition and works fine, so it can still be used.
Aichi, Japan
Makita TW001GRDX
- Manufacturer: Makita
Strongest torque in its class 1,350 N-m Achieved by 40Vmax & high-power brushless motor. Maximum loosening torque 2,050 Nm Effective for loosening rusted bolts and nuts. Battery BL4025 x 2 pcs, charger DC40RA, ca...
$509 USDKumagaya, Japan
Makita AN936H to AN936HM
- Manufacturer: Makita
Powerful Low recoil Low noise. Air pressure: 1.28 to 2.26 sMpa | Nails used: Wire nails 45-90mm Sheet nails (wide) 45-75mm | Number of nails loaded: Wire nails: 120-300 (1 roll)Sheet nails: 200 (1 roll) | Mass: 2...
$648 USDKumagaya, Japan
Makita HR005GRMX
- Manufacturer: Makita
High power equivalent to 40mm AC machine Unparalleled low vibration AVT & soft no-load Battery BL4040 x 2, Battery charger DC40RA, Case, Side grip, Stopper pole Bits are not included.
$745 USDKumagaya, Japan
Makita HR008GRMXV
- Manufacturer: Makita
Strongest in 30mm class Rechargeable Hammer Drill Drilling speed increased by approx. 35 Battery BL4040 x 2, Charger DC40RA, Case, Dust collection system, Side grip, Stopper pole Bits are not included.
$670 USDKumagaya, Japan
Makita HR008GRMX
- Manufacturer: Makita
Strongest in 30mm class Rechargeable Hammer Drill Drilling speed increased by approx. 35 Battery BL4040 x 2, Charger DC40RA, Case, Side grip, Stopper pole Dust collection system and bits are not included.
$613 USDKumagaya, Japan
Makita HR001GRDXV
- Manufacturer: Makita
Drilling speed increased by approx. 30 High collection rate of more than 99.97%. (Dust collection rate of the dust collection system is over 90%) Dust case capacity 400mL Battery BL4025 x 2, Charger DC40RA, Case,...
$595 USDKumagaya, Japan
Makita HR001GRDXB
- Manufacturer: Makita
Drilling speed increased by approx. 30 High collection rate of more than 99.97% (dust collection rate of the dust collection system is more than 90%) (Dust collection rate of the dust collection system is over 90...
$527 USDKumagaya, Japan
Tip: Enter manufacturer, model or keyword