Used Materials Testing in Flanders, Belgium

MICRO-DEVAL FRAME ONLY WITHout SAFETY CABINETS WITHOUT SPHER

• Manufacturer: Matest

MICRO-DEVAL FRAME ONLY WIèout SAFETY CABINETS WIèOUT SPHERES

A076-01 Set of 12 charges ASTM, AASHTO, UNI, UNE,CNR

Set of 12 charges ASTM, AASHTO, UNI, UNE,CNR

A069-01 Bulk density measure 5 Litres

Bulk density measure minimum 5 Litres following EN 1097-3

A069 Bulk density measure 1 litre

Bulk density measure minimum 1 litre following EN 1097-3

A CRT-PENDULUM Cooper Wessex Pendulum Skid Tester

• Manufacturer: Wessex

Cooper Wessex Pendulum Skid Tester Datasheet download link: demo on: Cooper Pendulum Skid Tester. Includes first traceable calibration, case and tool kit. Sliders to be ordered separately. All our Pendulums are...

Digital pressure system 0-200 kN 10N res

Digital pressure system 0-200 kN 10N res without pump Digital pressure manometer 0-200 kN. The applied load is measured by a high precision electric load cell with digital display, granting accurate readings als...

A121 Rock cradle to ASTM D5873

• Manufacturer: Matest

Rock cradle to use with C381 rebound hammer Standard: ASTM D5873 It is the equippement used to locate EX or NX core rock specimens during the classification test by the Rock Hammer model C381. Weight: 20 Kg

S246-01 : Falling head permeameter

Falling head permeameter Standard : CEN ISO/TS 17892-11 Used to determine the permeability of fine-grained soils such as clay-like or silty soils. The specimen is confined within the permeameter which is connecte...

ZORN MINI 3.1 Leichtes Fallgewichtsgerät 120 mm width

• Manufacturer: ZORN

ZORN MINI - 3.1 Light Weight Deflectometer Very light version (less than 10 kg total), easy to take with one person in any car. For determining the dynamic deformation modulus Evd in narrow trenches from 120 mm w...

SA224 200 kN

AX 01a, Electronic Static Plate Bearing Test Device according to DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250 4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-...

A122 : Barton combs (profilometers)

• Manufacturer: Lang

Barton combs (profilometers) Used for the evaluation of the surface roughness of rock samples. These simple devices allows very thin steel wires to perfectly lay to the outline of the sample under test, in order ...

S234-KIT Sand density cone apparatus 6,5"

Sand density cone apparatus 6,5" Used to determine the in-situ density of fine graned compacted soil. The test consists in digging a hole into the ground and then collect, dry and weight the sampled soil. The hol...

A147 : Compression device for rock cores

• Manufacturer: Macben BVBA

Compression device for rock cores Standard : ASTM D2938 Used to perform compression tests on rock core specimens having max. diameter 55 mm and height between 95 to 110 mm. The loading piston is sustained by two ...

Sauter Shore Hardness Tester HDA 100-1

HD Professional Shore hardness tester Sauter HDA 100-1 Shore A [Max]"100 HA [d]"1,0 HA •Shore A, 0 and D to measure the hardness of plastics through penetration measurement •Shore A rubber, elastomers, neoprene, ...

E142E Pull-off tester Defelsko ATA50C-B

• Manufacturer: Defelsko

E142E Pull-off tester Defelsko ATA50C-B Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, gl...