Used Machining Centers in New Zealand

1990 Mill

Bauermeister UT32 Universal Mill - YOM 1990, 3 ph, 37kw, 2600rpm, 165mm infeed, Product Receival Blender – approx, 5cbm, 3 ph, 5.5kw, paddle diameter 1440mm, int dims 2500mm L x 1500mm W x 1500mm H, 200mm screw a...

1987 Mill - Media/Bead

Eiger Engineering Ltd MK II 20L SSE TFV Media/Bead Mill, YOM 1987, 3 ph, 33amps, 18.5kw, 1500rpm. The direct drive Horizontal bead mill is made for super-fine wet grinding and dispersing operation. O’all dims app...

Milling Plant

Milling Plant consisting of ROTOGRAN Milling machine, model Mk4 c/w infeed hopper, vibratory cross feeder, KEK pin mill model 48 and rotary sieve.

Comitrol

Urschel 3600 Comitrol, 3 ph, 7.5kw, on wheels, with feed pump and spare cutting head. Ex site Australia. More info:

2011 Toast Slicer

Toast Slicer, model TS-202SP, made for F.E.D. Australia & New Zealand, YOM 2011, single phase, on/off controls, bench top, infeed 390mm W x 100mm H. 13mm gap between blades, o’all dims 880mm x 660mm x 670mm H

1997 Slicer

ABM 750L/5.50 Automatic Slicer, bench top but comes with stainless steel trolley, YOM 1997, 3ph, Ex meat Slicer.

2008 Fettucine Cutter

• Manufacturer: Farina Maquinas

Farina Maquinas Cortadora Fettucine Cutter, YOM 2008, 3 ph, 5 pin plug, 0.75kw, recently re-wired and serviced. Adapted to cut thicker strips. O’all dims approx. 1160mm x 530mm x 1270mm H.

Slicer

Pacific JS-4300 Slicer, for fresh meat, 3 ph, start/stop/reverse/e-stop controls, stainless steel, on wheels, overall dims 2650mm x 800mm x 1500mm H. Blade setups - 7mm and 9mm gap, belt width, 440mm, clearance h...

Cutter

Robot Coupe Blixxer 10 VV Cutter, approx. 3 years old, stainless steel, 11.5L capacity. Spec sheet available.

Comitrol

Urschel 3600 Comitrol, 3 ph, 7.5kw, on wheels, with feed pump and spare cutting head. Ex site Australia. More info:

Slicer

Twin Lane Fruit Slicer, conveyorised, stainless steel, 3 phase, electrics require some wiring, blades motor - 0.75hp, 1427rpm, conveyor motor - 1.5kw, 1400rpm.Previously used to slice apricots. Blade diam - 220mm...

Slicer

Yanagiya HS-100 Slicer, stainless steel, variable speed. Last used to slice seafood into 10mm x 100mm slices. ex site Australia

Luxcut KM-3BV CNC Machining Center, with Centroid M400 controller

Quality Taiwanese vertical machining centre. Good condition, runs well. square ways for column and base Ball screws on X,Y,Z axis Heavy duty saddle to support full width of table for stability Counter weight bal...

KiHeung KMB-UH-7S Heavy Duty Bed Mill, c/w 3 Axis DRO

• Manufacturer: Kiheung

Heavy duty bed mill with vertical head in good condition. Manufactured Dec 1995 Available now from Bay of Plenty Area 3 axis DRO Vertical head with NT50 taper Metric configuration Swivelling control panel Slidewa...