Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

Related Events

Live Now

The RBT Group – Shop Closing Due to Real Estate Acquisition

by Resell CNC

Laotto IN, USA
Ends Oct 9th, 11:00 CDT
View event
375

Used Machine Tools in Thuringia, Germany

  • 2007 SICMI KP 100

    2007 SICMI KP 100

    • Manufacturer: SICMI

    Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.

    Schmölln, Germany
  • 1991 MÜLLER EXP 60 SF/HK

    1991 MÜLLER EXP 60 SF/HK

    • Manufacturer: Muller
    • Model: EXP 60 SFHK

    - Fixed table - clamping plate - Ortlinghaus hydraulic clutch with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely t...

    Schmölln, Germany
  • 1996 MÜLLER-WEINGARTEN ARP 80

    1996 MÜLLER-WEINGARTEN ARP 80

    • Manufacturer: Weingarten
    • Model: ARP 80

    Equipment: - with wheel drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload - ejector - central grease lubrication - Cover plate for through-feed hole - Infinitely va...

    Schmölln, Germany
  • 1988 PSM HM 150-1000

    1988 PSM HM 150-1000

    • Manufacturer: ambold pressen- und maschinenbau

    - Motor-driven - Loop control via sensor - manual spreading - on base plate

    Schmölln, Germany
  • 1996 WABAMA VGS 100 x

    1996 WABAMA VGS 100 x 285

    • Manufacturer: Wabäma

    Equipment: Protective cover, electrically interlocked Belt straightener EBRW 10/5-40 Control unit, type ETOZ

    Schmölln, Germany
  • 1992 TOX-Pressotechnik PC 30.56

    1992 TOX-Pressotechnik PC 30.56

    • Manufacturer: TOX Pressotechnik
    • Stroke length: 200 millimeter
    • Throat depth: 250 millimeter

    Power pack press - The presses are equipped with a pneumohydraulic power cylinder. equipped. This divides the total stroke into an air-driven, and a hydraulic power stroke that starts automatically when the press...

    Schmölln, Germany
  • 1988 PSM H 150-1000

    1988 PSM H 150-1000

    • Manufacturer: PSM

    - Manual reel, bent - without own drive - manual Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: t | Inner coil diameter: mm | Total power re...

    Schmölln, Germany
  • 1968 IWK HEP 40

    1968 IWK HEP 40

    • Manufacturer: IWK

    2 guide pillars 2 parallel grooves in ram and table, running transversely

    Schmölln, Germany
  • 1983 SMERAL LEN 63 C

    1983 SMERAL LEN 63 C

    • Manufacturer: Šmeral Brno
    • Model: LEN 63 C

    - Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 63 t | Discharge: 315 mm | Hub: 10 - 105 mm | Strokes: 71 - 140 stroke/min | Ram adjustment: 70...

    Schmölln, Germany
  • 1983 SMERAL LEN 25 C

    1983 SMERAL LEN 25 C

    • Manufacturer: Šmeral Brno
    • Model: LEN 25 C

    - Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 25 t | Discharge: 225 mm | Hub: 8 - 85 mm | Table dimensions: 560 x 450 mm | Pestle dimensions:...

    Schmölln, Germany
  • 1990 MÜLLER PDE 75 SF

    1990 MÜLLER PDE 75 SF HK

    • Manufacturer: Muller

    Equipment: - Hydraulic mold clamping, 4 x table - ram weight compensation, made by Festo - central lubrication - motorized ram adjustment - hydraulic clutch - Breaking plate - Clamping piece locking hydr. - foot ...

    Schmölln, Germany
  • 1986 SMERAL LEN 40 C

    1986 SMERAL LEN 40 C

    • Manufacturer: Šmeral Brno
    • Model: LEN 40 C

    - Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 40 t | Discharge: 265 mm | Hub: 8 - 95 mm | Table dimensions: 660 x 520 mm | Pestle dimensions:...

    Schmölln, Germany
  • 1979 ZEULENRODA PYE 10 S1

    1979 ZEULENRODA PYE 10 S1

    • Manufacturer: Zeulenroda
    • Model: PYE 10

    Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm / sec | Speed up: 450 mm / sec | Distance table - ram: 630...

    Schmölln, Germany
  • GSW-SCHWABE MHM 1,5/1250

    GSW-SCHWABE MHM 1,5/1250

    • Manufacturer: Herman-Schwabe

    - Manual spreading - motor-driven - pressure roller - new lacquering

    Schmölln, Germany
  • 1995 DREHER 2370 B

    1995 DREHER 2370 B

    • Manufacturer: Dreher

    Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 300 mm | Coil weight: 1.5 tons | Inner coil diameter: 400 - 500 mm | Arm length: per arm 670 mm | Total power requ...

    Schmölln, Germany
1516171819

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.