Machine Tools » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

1583

Used controllers in Japan

  • Trusted Seller
    Shimada 2-Spindle CNC Lathes

    Shimada 2-Spindle CNC Lathes

    • Manufacturer: Shimada-Kitako

    The Shimada 2SI-6 / 2SI-8 / 2SI-10 2-Spindle 1NC Lathe was developed from the architecture of “reducing idle time to the utmost limit." - Collet chuck, 6", 8", 10", 12" chucks - Loading with one spindle while pro...

    Japan
  • NC Lathe

    NC Lathe

    • Manufacturer: Tsugami
    • Model: S206

    grasping rod diameter : Φ3-Φ20mm maximum working length : 210 mm spindle maximum bore diameter : Φ10 spindle speed : 200 - 10000 min Total Tools : 28 pcs control axis number : 6 axis

    Osaka, Japan
  • 2011 Daiei DL530x100

    2011 Daiei DL530x100

    • Manufacturer: Daiei

    CNC Control: FANUC 20i-TB Spindle Speed: 1,700 rpm 3-jaw Chuck: 10 inches (Through Hole Diameter: 80 mm) Distance Between Centers: 1,000 mm Swing Over Bed: 530 mm Swing Over Tool Post: 300 mm

    Japan
  • 2012 Mori Seiki NZX1500/800STY2

    2012 Mori Seiki NZX1500/800STY2

    • Manufacturer: Mori Seiki
    • Model: NZX-1500/800

    FANUC31iA 6-inch 3-jaw chuck for both main and sub (Kitagawa/BB206) 16-corner turret (top 2 pcs (left: combined), bottom 1 pc (combined)) Right-feed chip conveyor 51Φ through diameter for both main and sub If the...

    Tatebayashi, Japan
  • 2020 Nakamura-Tome Precision Industry WY-100II

    2020 Nakamura-Tome Precision Industry WY-100II

    • Manufacturer: Nakamura
    • Model: WY-100

    FANUC Main: Collet chuck (SAD50) Sub: 6-inch 3-jaw chuck (Kitagawa/B206) Upper: 12-square turret (with Y axis, 24-position indexing) Lower: 12-square turret (with Y axis, 24-position indexing) With upper/lower to...

    Tatebayashi, Japan
  • 2005 Tsugami TMU-1

    2005 Tsugami TMU-1

    • Manufacturer: Tsugami
    • Model: TMU1

    FANUC18i-TB Main: Collet chuck (φ38) Sub: Collet chuck (φ38) 16 square turret 60 ATC with parts catcher With work conveyor With tool presetter With chip conveyor With medium pressure coolant unit (filtration devi...

    Tatebayashi, Japan
  • 2014 Tsugami B0326-II

    2014 Tsugami B0326-II

    • Manufacturer: Tsugami
    • Model: B0326

    FANUC32i-MODELB With rotary guide bush 12 OD turning tools can be mounted 4 cross rotary tools 8 sub-side end face drilling tools can be mounted (4 of them rotary tools can be mounted) With workpiece take-out con...

    Tatebayashi, Japan
  • 2002 Miyano BJ20

    2002 Miyano BJ20

    • Manufacturer: Miyano

    FANUC21i-T Collet chuck, 1st turret 12 square, 2nd turret 8 square, 4 cross rotary tools (Y-axis) attachable, with parts catcher, workpiece take-out conveyor, mist, auto bar 2.

    Tatebayashi, Japan
  • 1998 Citizen L-32

    1998 Citizen L-32

    • Manufacturer: Citizen
    • Model: L32

    MELDAS rotary guide bush 5 external turning tools can be mounted 4 cross turning tools can be mounted 3 end face drilling in main direction 5 end face drilling in sub direction Auto bar 2.

    Tatebayashi, Japan
  • 2005 Mori Seiki NL2000Y/500

    2005 Mori Seiki NL2000Y/500

    • Manufacturer: Mori Seiki
    • Model: NL-2000Y/500

    MSX-850Ⅲ(MELDAS) Collet chuck (RIKEN/SAD-65C) 16 square turret with center, with parts catcher, with right exit chip conveyor, auto bar (Alps/ASQ-80/2005) If there is any difference between the contents and the a...

    $38,826 USD

    Get financing

    Est. $731/mo

    Tatebayashi, Japan
  • 1998 Miyano BNE-51S

    1998 Miyano BNE-51S

    • Manufacturer: Miyano
    • Model: BNE51S

    FANUC18-T Main and sub collet chuck Upper turret 12 square (combined type) Lower turret 10 square (combined type) With parts catcher With workpiece discharge conveyor With mist collector With right hand chiff con...

    Tatebayashi, Japan
  • 2006 Citizen C16Ⅸ

    2006 Citizen C16Ⅸ

    • Manufacturer: Citizen
    • Model: C16

    MELDAS Rotary guide bush Sub spindle 6 O.D. Product name: NC automatic board | Warehouse: Machine Plaza Honjo (Honjo, Saitama)

    Tatebayashi, Japan
  • 2006 Tsugami BU20

    2006 Tsugami BU20

    • Manufacturer: Tsugami
    • Model: BU20

    FANUC16iT Rotary guide bush specification 4 OD turning tools can be mounted 3 cross rotary tools 8-square turret Y-axis sub-spindle Parts catcher Workpiece loading/unloading conveyor Chip conveyor Mist collector ...

    Tatebayashi, Japan
  • 2008 Citizen A16 IP

    2008 Citizen A16 IP

    • Manufacturer: Citizen
    • Model: A16

    FANUC0i-TB Rotary guide bush 5 O.D. bytes can be installed 4 end-face drilling mains Automatic fire extinguishing device Auto bar 2.5m specification (Ikura/SA16C-6C/2008) If there is any difference between the co...

    Tatebayashi, Japan
  • 2000 Nakamura-Tome Precision Industry TW-10MM

    2000 Nakamura-Tome Precision Industry TW-10MM

    • Manufacturer: Nakamura
    • Model: TW-10MM

    FANUC18i-T (with interactive function) Main side 6-inch 3-jaw hollow chuck (Kitagawa/B-206) Sub side collet chuck (Riken/SAD-40) Left 12-corner turret with composite Y axis Right 12-corner turret with composite 6...

    Tatebayashi, Japan
  • no-image_en.png

    Citizen A32 CNC Lathe

    • Manufacturer: Citizen
    • Model: A32

    Good condition Citizen A32 CNC Lathes manufactured in 2011. Located in Czech Republic and other countries. Click request price for more information.

    Czech Republic
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.