Machine Tools » Japan

Building Filters

83

Used control unit in Japan

  • Trusted Seller
    Shimada 2-Spindle CNC Lathes

    Shimada 2-Spindle CNC Lathes

    • Manufacturer: Shimada-Kitako

    The Shimada 2SI-6 / 2SI-8 / 2SI-10 2-Spindle 1NC Lathe was developed from the architecture of “reducing idle time to the utmost limit." - Collet chuck, 6", 8", 10", 12" chucks - Loading with one spindle while pro...

    Japan
  • Trusted Seller
    2009 OKUMA LB4000EX-1500

    2009 OKUMA LB4000EX-1500

    • Manufacturer: Okuma
    • Model: LB4000 EX
    • Spindle bore: 52 mm

    Machine Specifications ○NC Unit OSP-P200L ○Spindle Chuck: 12-inch Hollow Chuck, Kitagawa B-212 Through Hole: φ80mm, Inside Draw Tube Spindle Speed: 42-4200 rpm Motor: 30/22 kW ○Capacity Swing Over Bed: φ670mm Max...

    Tokyo, Japan
  • Trusted Seller
    2009 CITIZEN RL02-V

    2009 CITIZEN RL02-V

    • Manufacturer: Citizen

    Machine specification ○ NC device 1F5 FANUC-0iTC *Y-axis additional option, 3-axis specification ○Spindle capacity Collet chuck Air open/close type Max. machining chuck diameter φ20mm Max. machining length 70mm S...

    Tokyo, Japan
  • Trusted Seller
    2019 DAINICHI MG65x190

    2019 DAINICHI MG65x190

    • Manufacturer: Dainichi

    Machine Specifications NC Unit FANUC-32i Model A Spindle Chuck: 15-inch, Kitagawa Hydraulic, N-15, Solid End Shape: JIS A1-11 Spindle Through-Hole: φ85mm Capacity Bed: φ650mm Carriage: φ360mm Center Distance: 200...

    Tokyo, Japan
  • Trusted Seller
    2015 Takizawa Iron Works TCN-3500

    2015 Takizawa Iron Works TCN-3500 L10

    • Manufacturer: Takizawa Iron Works

    Machine specifications ○ NC system FANUC-32iB ○ Main spindle Chuck 10 inch three-jaw Kitagawa B-210 Spindle speed 2500 rpm Motor 15/11 kW 30 min / continuous ○ Capacity Vibration on bed φ490 mm Maximum workpiece ...

    Tokyo, Japan
  • Trusted Seller
    2015 amada machine & tools

    2015 amada machine & tools c-3d

    • Manufacturer: Amada

    Machine Specifications ○NC Unit FANUC-0iTD 10.4-inch Color Interactive ○Capacity/Capacity Swing Over Bed φ550mm Swing Over Carriage φ340mm Center Distance 800mm ○Spindle Chuck: 9-inch 3-jaw Scroll End Shape: A2-N...

    Tokyo, Japan
  • Trusted Seller
    Shimada-Kitako 4-Spindle Horizontal CNC Lathe

    Shimada-Kitako 4-Spindle Horizontal CNC Lathe

    • Manufacturer: Shimada-Kitako
    • Model: HS4200N

    HS4200n Ultra High-Speed Production CNC Lathe with High-Speed Automatic Part Loading System - The newest version of the uniquely designed 4-spindle lathe. - By increasing the rapid feed rate on each axis, spindle...

    Japan
  • 2017 Tsugami BH20Z

    2017 Tsugami BH20Z

    • Manufacturer: Tsugami
    • Model: BH20Z

    FANUC-31i MODEL B Collet chuck for both main and sub guide bushless, 4 OD turning tools can be mounted 12-corner turret with Y-axis, automatic fire extinguishing system, medium pressure coolant unit (5 systems), ...

    Tatebayashi, Japan
  • 2005 Tsugami TMU-1

    2005 Tsugami TMU-1

    • Manufacturer: Tsugami
    • Model: TMU1

    FANUC18i-TB Main: Collet chuck (φ38) Sub: Collet chuck (φ38) 16 square turret 60 ATC with parts catcher With work conveyor With tool presetter With chip conveyor With medium pressure coolant unit (filtration devi...

    Tatebayashi, Japan
  • 2015 Tsugami B0125-II

    2015 Tsugami B0125-II

    • Manufacturer: Tsugami
    • Model: B0125

    FANUC0i-TD Rotary guide bush (kerator type) 12 external bites can be installed 3 end face drilling holes can be installed 3 coolant medium pressure units can be installed Automatic fire extinguishing device inclu...

    Tatebayashi, Japan
  • 2007 CITIZEN A20VIPL

    2007 CITIZEN A20VIPL

    • Manufacturer: Citizen
    • Model: A20VI PL

    FANUC Rotary guide bush Sub-spindle 7 O.D. bites can be mounted 3 cross rotary tools 4 end-face drilling tools common to main and sub spindles 4 parts catchers Workpiece removal conveyor with 4 coolant medium pre...

    Tatebayashi, Japan
  • 2017 Okuma V40R

    2017 Okuma V40R

    • Manufacturer: Okuma
    • Model: V40R

    FANUC31i MODEL B 12 square turret (composite) with C-axis Rear feed chip conveyor with high pressure coolant unit with mist collector with safety device on front door In case of any discrepancy between the descri...

    Tatebayashi, Japan
  • Tsudakoma 12-1/2" Hor/Vert Circular NC

    Tsudakoma 12-1/2" Hor/Vert Circular NC Rotary Table RNCV-300R w/Jib & Controller

    • Manufacturer: Tsudakoma

    Tsudakoma Horizontal/Vertical Circular NC Table Model #: RNCV-300R M/C No: 206278 Table Diameter: 12-1/2'' Controller Horizontal or Vertical mounting 8-1/4" Center Height (Horizontal) 7-3/4" Height (Vertical) Rot...

    $2,250 USD
    Japan
  • Heavy duty CNC lathe

    Heavy duty CNC lathe

    • Manufacturer: PROKING

    Used PROKING heavy duty CNC lathe (y2010) Swing over bed 1800m/m,Bed width　1500m/m,Processing diameter1800m/m,Processing length6000m/m,FANUC 18i,Hydraulic chuck 32 (812m/m) * 1 unit , C type center rack *1 unit,T...

    Osaka, Japan
  • Trusted Seller
    U.S.A. D-25150

    U.S.A. D-25150

    • Manufacturer: United States of America

    Machine specifications 0Producing country U.S.A. 〇 Swing 640mm dia. Spindle hole size .3 Spindle speed 85-120-170-240-500-1000-1460rpm Feed speed 0.004-0.007-0.010-0.015 mm/rev Spindle motor 230V 1.3/1.6HP 5.6/4...

    Tokyo, Japan
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.