Machine Tools » Bavaria

Search By Category

Search By Manufacturer

Building Filters

3075

Used Machine Tools in Bavaria, Germany

  • 2014 Hwacheon Hi-Tech 200 Bl

    2014 Hwacheon Hi-Tech 200 Bl

    • Manufacturer: Hwacheon
    • Model: Hi-Tech 200

    Very good condition! Available immediately! Control: Fanuc Oi - TD | Travel: X-195 mm, Z-660 mm | Programmable tailstock: via M function | Turning diameter: 254 mm | Tool turret: 12x | Coolant tank : 180L, 6 bar...

    Nördlingen, Germany
  • Trusted Seller
    AK-BEND -APK 50

    AK-BEND -APK 50

    • Manufacturer: Ak-Bend
    • Power requirement: 1.1 kW

    Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control p...

    Günzburg, Germany
  • Trusted Seller
    ZOPF ZB 140/3H2

    ZOPF ZB 140/3H2

    • Manufacturer: Zopf
    • Power requirement: 7.5 kW

    Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays f...

    Günzburg, Germany
  • Trusted Seller
    1980 VOEST DA 180

    1980 VOEST DA 180

    • Manufacturer: Voestalpine
    • Model: DA 180

    Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Turning diameter over bed: 230mm | Turning diameter over slide: 120mm | Center distance: 800mm | Spindle spe...

    Günzburg, Germany
  • Trusted Seller
    AK-BEND ASM 140-12/5,0

    AK-BEND ASM 140-12/5,0

    • Manufacturer: Ak-Bend
    • Model: ASM 140-1250

    Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pe...

    Günzburg, Germany
  • Trusted Seller
    BURNET CFM 1360 x 3,0

    BURNET CFM 1360 x 3,0

    • Manufacturer: BURNET
    • Maximum thickness: 1.5 mm
    • Power requirement: 3 kW

    Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...

    Günzburg, Germany
  • Trusted Seller
    1995 SCHECHTL MSB/NC 250

    1995 SCHECHTL MSB/NC 250

    • Manufacturer: Schechtl
    • Maximum thickness: 2.5 mm

    Control: conventional - | Storage location: Günzburg | Plate length: 2500mm | Plate thickness: 2,5mm

    Günzburg, Germany
  • Trusted Seller
    ZOPF T 400 digital

    ZOPF T 400 digital

    • Manufacturer: Zopf
    • Power requirement: 4 kW

    Control: NC - | Storage location: Factory | Freight basis: Delivery ex works. | Press capacity: 400/40kN | Stroke length: 285mm | Working feed: 10mm/sec | Return speed: 20mm/sec | Table dimensions: 660x1250mm | ...

    Günzburg, Germany
  • Trusted Seller
    NARDINI MS 175E

    NARDINI MS 175E

    • Manufacturer: Nardini
    • Model: MS 175E

    Control: conventional - | Freight basis: Delivery ex warehouse Günzburg. | Turning diameter over bed: 350mm | Center height: 175mm | Center distance: 800mm | Turning speeds: 25-2000U/min

    Günzburg, Germany
  • Trusted Seller
    ZOPF ZB 80/2 M

    ZOPF ZB 80/2 M

    • Manufacturer: Zopf

    Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - U...

    Günzburg, Germany
  • Trusted Seller
    ZOPF ZB 100/3H

    ZOPF ZB 100/3H

    • Manufacturer: Zopf

    Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings -...

    Günzburg, Germany
  • Trusted Seller
    GEKA Bendicrop 60 S

    GEKA Bendicrop 60 S

    • Manufacturer: Geka
    • Model: Bendicrop 60S
    • Throat depth: 250 mm
    • Maximum thickness: 6 mm

    Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Suppo...

    Günzburg, Germany
  • Trusted Seller
    AK-BEND APK 45

    AK-BEND APK 45

    • Manufacturer: Ak-Bend
    • Model: APK 45

    Domestic equipments: - hydr. delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel

    Günzburg, Germany
  • Trusted Seller
    ZOPF ZB 80/2 H

    ZOPF ZB 80/2 H

    • Manufacturer: Zopf
    • Model: ZB 802 H

    Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - U...

    Günzburg, Germany
  • Trusted Seller
    ZOPF ZB 70/3M ECO

    ZOPF ZB 70/3M ECO

    • Manufacturer: Zopf

    Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the gui...

    Günzburg, Germany
4647484950

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.