Used drilling machine in Australia

Geared Head Drill

• Manufacturer: Sx power

Used Geared Head Drill Vice Drill chuck and Arbor 25mm Drilling Capacity Good working condition 415 volt Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Ou...

Geared Head Pedestal Drill

• Manufacturer: HXMC

Geared Head Pedestal Drill comes with Drill chuck and Arbor Round Table 25mm Capacity Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Our seasoned, expert ...

Nider Geared Head Drill Press

Used Nider Geared Head Drill Press - $1000 + GST - excellent condition - 415v - keyless chuck - same as an Arboga - 100-1300 rpm - geared head - loading available

Brobo Waldown 8SN Pedestal Drill Press

• Manufacturer: Brobo

Used Brobo Waldown 8SN Pedestal Drill Press - $1500 + GST - 415v, 0.75kW motor - excellent condition, ex govt - t-slot table - Australian made - hand wind table lift and lower - tiltable table - 160 to 5500 rpm -...

Pedestal Drill

Strands S-53 geared head pedestal drill 3 morse taper, speeds 100-1360rpm (8 off) 2 speed 415 volt motor 1/1.2hp. Foot safety pedal Made in Sweden. Ex Govt.

Geared Pedestal Drill

Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg

Waldown Radial Arm Pedestal Drill

Used Waldown Radial Arm Pedestal Drill - $1200 + GST - 240v! - Australian made! - in excellent condition - table has had some minor braze repairs - keyless chuck - table lifter - table can rotate - loading available

Geared Head Pedestal Drill

ERLO TSAR-32 4mt, capacity 32mm drilling, 28mm tapping. spindle speeds 75-2100rpm (8 off), feeds 0.1-0.3mm/rev (3 off) 400mm x 420mm tilt table, 160mm quill travel, 70-885mm spindle to table 1.1kw 415volt, Coolan...

Hikoki SDS Max 1100W 2 Mode Rotary Hammer Drill DH40MC

• Manufacturer: Hikoki

For more demolition performance and a faster drilling speed, add this 40mm Rotary Hammer from Hikoki to your arsenal With superior working comfort thanks to advanced air dampening and cushioning, one push bit mou...

Formosa 700 Radial Arm Drill

Used Formosa 700 Radial Arm Drill - $1200 + GST - 415v - 700mm radial travel - MT4 spindle - average condition, fully functional, priced accordingly - 88rpm to 1500rpm - forwards and reverse - powered raise/lower...

Akyapak Meteor-1200 Drill Line

• Manufacturer: Akyapak
• Model: Meteor-1200

Good condition Akyapak Meteor-1200 Drill Lines manufactured in 2019. Located in USA and other countries. Click request price for more information.