Machine Tools » Aichi

Search By Category

Search By Manufacturer

Building Filters

669

Used Machine Tools in Aichi, Japan

  • 2007 Okuma LCS-250

    2007 Okuma LCS-250

    • Manufacturer: Okuma
    • Model: LCS-250

    OSP-P20L, Swing over the bed: 450mm, Maximum processing: φ270*280mm, S: (X)155*(Z)320mm, 100 to 4200rpm, Octagonal turret, Pin arbor chuck (Imperial OPA-100), No tailstock, No tailstock, with chip control, No gan...

    Toyohashi, Japan
  • BOSCH / Bosch GSC 2.8

    BOSCH / Bosch GSC 2.8

    • Manufacturer: Bosch
    • Model: GSC 28

    Single phase AC 100 V (50/60 Hz), Number of strokes: 2500 min, Minimum curve Cutting radius: 20 mm, Cutting capacity: (mild steel plate) 2.8 mm (stainless steel) 2.0 mm (aluminum) 3.5 mm ※ If there is a differenc...

    Toyohashi, Japan
  • 1998 Miyano BNE-34S3

    1998 Miyano BNE-34S3

    • Manufacturer: Miyano
    • Model: BNE34S3

    2-turret, 2-spindle type, FANUC-18T, FANUC-18T, FANUC-18T, FANUC-18T FANUC-18T, Max. machining: φ34*90mm, L main spindle: 170~5000rpm L main spindle: 170 to 5000 rpm Turret: 10 square, S:(X)115*(Z) S:(X)115*(Z)12...

    Toyohashi, Japan
  • 2000 Alps AX-5

    2000 Alps AX-5

    • Manufacturer: Alps

    3m specification,. Material diameter: φ18 to φ60mm, flat 16 to 46mm, Used for Mazak INTEGREX In case of any discrepancy between the description and the actual product, the actual product will be given priority.

    Toyohashi, Japan
  • 2006 Mori Seiki NZ-S1500

    2006 Mori Seiki NZ-S1500

    • Manufacturer: Mori Seiki
    • Model: NZ-1500

    Suitable for Shaft Machining, MSC-700(FANUC-32iA) MSC-700(FANUC-32iA), Max. Max. machining: φ120*535mm, Standardized bore size: φ20-60mm Standardized bore size: 20 to 60mm dia. S: (X1)60*(X2)60*(Z1)580*(Z2)580mm,...

    Toyohashi, Japan
  • DELUXE 909

    DELUXE 909

    • Manufacturer: DELUXE

    ※ If there is a difference between the description content and actual item, we will prioritize the actual item.

    Toyohashi, Japan
  • NEWS TCT-500

    NEWS TCT-500

    • Manufacturer: NEWS

    φ 500, Tilt angle: 0 to 90 °, With base

    Toyohashi, Japan
  • 2016 Tsugami M06SY

    2016 Tsugami M06SY

    • Manufacturer: Tsugami
    • Model: M06SY

    FANUC-0iTD,. Max. machining: ø260/ø51 (bar material)*380mm, Main spindle through-hole diameter: φ73mm Main spindle 4500rpm, Rear spindle 4500rpm Back side 4500rpm, Milling 5000rpm Milling 5000rpm, 12 square turre...

    Toyohashi, Japan
  • Mitsui JC8MA

    Mitsui JC8MA

    • Manufacturer: Mitsui Seiki

    Toyohashi, Japan
  • Kitagawa Iron Works KBT-360

    Kitagawa Iron Works KBT-360

    • Manufacturer: Kitagawa

    Drilling: 13mm,. Tap: (steel)10mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.

    Toyohashi, Japan
  • 2004 Mori Seiki RL-153

    2004 Mori Seiki RL-153

    • Manufacturer: Mori Seiki

    MSG-803L(MELDAS64) with dialogue function, Maximum swing: 334mm dia, Distance between spindles:340mm, Max. machining: φ220*150mm, S: (X)130*(Z)150mm, 60 to 6000rpm, Decapod turret*2, Left pin arbor chuck (O.D. gr...

    Toyohashi, Japan
  • 1997 Techno-Washino LN-32N

    1997 Techno-Washino LN-32N

    • Manufacturer: Washino

    FANUC O-TC, Swing on bed: φ490mm, Swing on reciprocating table: ø260mm, Distance between centers: 800mm, Distance between centers: ø260mm, Distance between centers: ø260mm Distance between centers: 800mm, Main sp...

    Toyohashi, Japan
  • 1995 Kitamura Corporation KNC-201

    1995 Kitamura Corporation KNC-201

    • Manufacturer: Kitamura

    FANUC21-T, Swing over bed: φ300mm, Collet bore diameter: φ20mm, Max. processing:φ100*100mm, 6000rpm, S:(X)200*(Z)160mm, With parts feeder (SK-D) In case of any discrepancy between the description and the actual p...

    Toyohashi, Japan
  • Takeda Machinery TK-200 HVS

    Takeda Machinery TK-200 HVS

    • Manufacturer: Takeda

    Width of the mouthpiece: 206 mm, Height of the mouthpiece: 62 mm, Height of the mouthpiece: 62 mm Height: 62mm, Opening width: 300mm, Weight: 89kg In case of any discrepancy between the description and the actual...

    Toyohashi, Japan
  • Tsudakoma TT-300

    Tsudakoma TT-300

    • Manufacturer: Tsudakoma
    • Model: TT-300

    Table diameter: φ300, Inclination angle: 90° *If there is a difference between the description and the actual product, the actual product will be given priority.

    Toyohashi, Japan
4142434445

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.