Used Agitators, Blenders, Mixers in Ohio, USA

Farrel 11D Mixer Bull Gear

• Manufacturer: Farrel

One (1) used set of Farrel 11D bull gear rotors Units available: 2 | Size: 11D | Style: Rotors Bull Gear

Farrel #9D Spare Mixer Body

• Manufacturer: Farrel

One (1) Used Farrel #9D unidrive chamber only, 180 liter capacity, 2-wing rotors, FYH dust stops, S/N 046025

Farrel #9D 180L Spare Mixer Body

• Manufacturer: Farrel

One (1) Used Farrel #9D unidrive chamber only, 180 liter capacity, 2-wing rotors, FYH dust stops S/N 936138

Tumble Blender 4667

One (1) used Tumble Blender Stainless steel Chamber is 18" diameter x 29" deep 30 gallons or 4 cubic feet On stand with outboard roller bearings 1 hp gear reduced drive, 3 phase, 208-230/460 V Chain and sprocket ...

30 Liter Ice Blender 4902

One (1) used Ice Blender Model: A-30L Stainless steel LXEOLEO 12.5" diameter x 16" deep Three tier high speed blade with serated edge Flat removable cover Built 2017 Single phase, 110V 3300 RPM Constant speed, sp...

55 cu ft Ribbon Blender 3883

One (1) used 55 cu ft Ribbon Blender Manufactured by Toronto Coppersmithing Co. Ltd. Serial number: 3060 Trough and ribbon are 304 stainless steel Exterior legs and base are made of steel 40" wide x 72" long x 48...

20 cu ft Double Ribbon Blender 4970

One (1) used 20 cu. ft. Double Ribbon Blender Made by Robinson Mfg Mill Builders Size: 4 Serial number: 1131 Trough dimensions: 2' x 6' Stainless steel ribbon Carbon steel trough 7.5 HP motor, gear reduced drive,...

Hobart Mixer 5222

• Manufacturer: Hobart

one(1) used Hobart Mixer Model C100T Serial number 11-273-078 Mixing capacity 10 qt Single phase, 115 volts, 1/4 hp three speeds with timer(which we did not check to see if it works) stainless steel bowl, 10" dia...

set of Stainless Steel Paddle Blender Paddles 5002

eight(8) used Paddle Blender Blades stainless steel with hardened surface Tip to tip (left to right) 15 3/4" - 15 5/8" 12 7/8" from bolt on end to blade end. Area you bolt to the shaft: 2.5" x 1" thick 2 bolt h...

15 cu ft Double Ribbon Blender 3104

One (1) used 15 cu ft Double Ribbon Blender 24" wide x 60" long x 30" deep trough Center bottom outlet Ribbon and trough are rubber lined No drive included Shaft through bearing is 3.5" diameter Large heavy duty ...

60 cu ft Double Ribbon Blender 5005

one(1) used 60 cu ft Double Ribbon Blender stainless steel contact parts 36" wide trough x 96" long trough, 40" deep 6" diameter shaft, with outboard roller bearings. 13" x 13" center bottom outlet equipped with ...

Jaygo Mixer 4067

one(1) used Jaygo Mixer. Model DSVS-10/5TM Serial number 2816/2 stainless steel. 3 hp SEW Eurodrive, gear reduced top entering. 58 rpm output. 3 phase, 230/460 voltage. Tank top is 36" O.D. with O-ring 1" from ou...

Eirich Mixer 3451

• Manufacturer: Eirich

One (1) used Eirich Counter-Current Rapid Mixer Model EBG-2 Serial number 14179 100 Liter capacity. 36.75" diameter bowl x 12" deep Muller wheel 4.75" face x 14.5" diameter 3 mixing arms Scraper blade 7.5 HP elec...

PAUL O ABBE TWIN CONE BLENDER; STOCK #75398

• Manufacturer: Paul O. Abbe

Stock#: 75398 | Cone opening: 4" | Cone diameter: 12" | Cone depth: 12" | Cone centers: 20 | Mounted on stand: YES | Motor horsepower: 1/4

GlassMaster Turbin Mixer 4771

One (1) used GlassMaster Turbin Mixer (sand, glass, and silica mixer) Manufactured by Mixer Systems Inc. Model 5100 30" deep x 96" diameter Flat top with hinged access doors Pneumatic discharge door Abrasive resi...