Used Agitators, Blenders, Mixers in New York, USA

Ross RVMS-100 Mixing Reactor

• Manufacturer: Ross
• Model: RVMS-100

Model: RVMS-100 One pre owned Ross model RVMS-100. Pharmaceutical mixing reactor. Rated 30 PSI @ 300 Deg.F. Has "Egg Beater" and turbine blade on one mixing shaft. Mixer drive is Lightnin 1.74 HP, 208-220/440 vo...

Processall 4 HVP Tilt-A-Mix

Model: 4 HPV One pre owned Processall 4HVP Tilt-A-Mix. 4 liter 316 ss mixer tilt-a-mix reactor, O/a 22" x 40" x 52" on wheels, 8" x 9" reactor, Tilts vertical or horizontal, 1.5" in hd,(5) .50"si/o, (3).25" si/o,...

Patterson Kelley 2 CFT Twin Shell VBlender with Pin Bar

• Manufacturer: Patterson-Kelley

Model: 2 CFT One pre owned Patterson Kelley 2 CFT Twin Shell Vblender with Pin Bar. 60 Lbs/CFT Material Density. 6 Inch Butterfly Discharge Valve. Unit is on wheels for portability. Bar is driven by a 2 HP, 230/...

PATTERSON KELLEY SS MODEL LB- B427 #13421

• Manufacturer: Patterson-Kelley

8-quart Patterson-Kelley twin shell blender, model LB- B427, unit made of all stainless-steel construction, 115 Volt, 1Ph/60Hz. fractional motor. WATCH A VIDEO

Gala Edge 1000 – New 2009 Complete with Spin Dryer & NEW Screens

Gala Edge 1000 – New 2009 – Complete with 80 GPM tempered water system – 24 hole single row die, operator control panel, Gala 6 spoke self-aligning cutter, Gala pelletizer cutting head, agglomerate catcher, exter...

Vecoplan Sorting Line/Box Dumper/Infeed Conveyor/Sorting Line

• Manufacturer: Vecoplan

“LIKE NEW” Heavy Duty Box Dumper/Infeed Conveyor/2 Manual Sort Line – CONSISTING OF THE FOLLOWING: Ensign Tipper/2,500 Lb. Capcity/52″ Width Heavy Duty 24″ Infeed Conveyor/Charge Hopper/2,500 lb. Capacity Heavy D...

Vecoplan RG52/100 -60 Cutters – REFURBISHED

• Manufacturer: Vecoplan

Cumberland model CT5090

• Manufacturer: Cumberland

ADMIX DYNASHEAR HIGH SHEAR IN LINE EMULSIFIER MODEL DS 850: DOM 2021 #13921

• Manufacturer: Admix

Admix Dynashear Model DS-850, High Shear Inline Emulsifier, DOM. 2021, Maximum flow rate @ 350 gallons per minute Axial top speed: 2650 feet per minute Axial diameter: 5.62 inches Radial diameter: 8.5 inches Seal...

Patterson Kelley Blend master 4 Qt stainless steel shell

• Manufacturer: Patterson-Kelley
• Model: BLEND MASTER

Patterson Kelley 4 Quart Laboratory Blend-Master V Blende

Patterson Kelley Blend master 4 Qt stainless steel shell cross flow

• Manufacturer: Patterson-Kelley
• Model: BLEND MASTER

Patterson Kelley Blend master. This unit comes with a 4 Qt stainless steel shell cross flow stainless steel shell with covers

STAINLESS STEEL POWDER FEEDER DISCHARGE HEIGHT 108” #13776

• Manufacturer: gpi equipment

2013 Powder feeder all stainless steel, includes electric vibrators that are 60Hz, 220V. capable of 3600 R/min. also includes 3HP motor, 3 Ph, 60 Hz, 220/440V, Discharge height is currently 108”

CONE MILL #11069

One NEW Cone Mill, Model 197. Unit comes with a variable frequency drive to control the speed also includes 2 HP motor, 1725 RPM. 220-440 volt 60 Hz 3 Ph. Dimensions of the unit are 39 inches high X 28 wide and 2...

Ensign Powered Incline Auger 73″ x 90″ – New 2017

• Manufacturer: Ensign

Ensign Powered Incline Auger 73″ x 90″ – New 2017 73″ x 90″ 75″ discharge height 7″ OD auger 208 volt with variable frequency drive inverter motor startere controls