Building Filters
- Trusted Seller

Mixer, Agitator, 0.33 HP, MixMor, Mdl GVS-13 #S743038
- Manufacturer: MixMor
MixMor Gear Drive Mixer, Model GVS-13. Includes a 0.33 HP, 90-volt motor running at 1750 RPM. Flange mount design with a 5/8" shaft diameter. Does not include shaft and propeller. Serial number 10852-7.
San Dimas, CA - Trusted Seller

Customized 200 gallon kettle with inclined agitator
- Manufacturer: Hongda
*Hemispherical style kettle. *Sanitary configuration. *Constructed of stainless steel 316 type product contact areas, 304 for other parts. *Steam jacket is ASME-U Stamped at 90 Psi and NB registered. Equipped ...
Ontario, CA - Trusted Seller

Mixer, Agitator, MixMor, S/st, Clamp on style, Mdl D14 #C738805
- Manufacturer: MixMor
MixMor Clamp-On Stainless Steel Agitator, Model D14 - Powered by 0.5 HP motor, features 5/8" diameter x 42" long shaft with 4" diameter propeller. Shaft is damaged.
San Dimas, CA - Trusted Seller

Mixer, Agitator, 3 HP, IPTS, C/st, HDVI-182TC, #S523945
- Manufacturer: IPTS
IPTS top entering, flange mounted agitator, with 3 HP, 230/460V motor. Unit is model HDVI-182TC, complete with 4.134:1 ratio gearbox with 1750 RPM drive motor, 423 RPM output. Unit has 7/8" diameter stub shaft fo...
San Dimas, CA - Trusted Seller
Spx Flow 322-TEQ-7.52
- Manufacturer: SPX Flow
The mixers and agitators, that are custom designed and fabricated, are used for equalization, neutralization, flocculation, aeration, sludge mixing, flash mixing and general blending purposes. The Lightnin indust...
$4,950 USDOrange, CA - Trusted Seller

Mixer, Agitator, 1/2 HP, Pfaudler, S/st, X-1749 (3) #S523970
- Manufacturer: Pfaudler
Pfaudler top entering tank agitators, model X-1749, complete with 1.5 HP, 230/460V drive motor. Mixer features 2" diameter solid stainless steel shaft, 7'4" long with 4" diameter 4 blade propeller blade at bottom...
San Dimas, CA - Trusted Seller$1,950 USDOrange, CA
- Trusted Seller

580 Gallon Stainless Steel Tank with Agitator
- Manufacturer: Perma-San - Stainless Products Corporation
Mounted on Legs Capacity: 580 Gallons | Tank size: 5ft Dia. x 46.5in Deep | Agitator: 3-Blade Impeller | Agitator drive: Electric Motor | Power output: 1HP | Rotation speed: 1750RPM | Voltage: 115/230 Volts
Los Angeles, CA - Trusted Seller

Mixer, Agitator, 2 HP, MixMor, Model OD-2, Fixed Mount (2) #S745083
- Manufacturer: MixMor
(2) MixMor fixed-mount top-entering mixers, Model OD-2. Designed for 1-1/4" diameter shafts. Driven by 2 HP, 230/460V, 3-phase, 60Hz, 1730 RPM motors rated for hazardous environments. Serial number 62638-2.
San Dimas, CA - Trusted Seller

Mixer, Agitator, Lotus, Shaft & Paddles, #C738107
- Manufacturer: Lotus
Mixer Shaft with Paddles, Lotus - Mild steel shaft coated in rubber measures 3" diameter x 13' long. Includes (3) 24" paddles with hubs. Unused.
Chowchilla, CA - Trusted Seller

25 USG commercial tilting jacketed kettle with double agitators
- Manufacturer: Hongda
New 25 Gallon 304 SS Kettle - Jacket rated for 95 degree C hot oil - Hemispherical style kettle with Tri-leg configuration with flanged feet, - 2" bottom center flush mount ball valve - Single motion side and bot...
Ontario, CA - Trusted Seller

Mixer, Agitator, 125 HP, Mixing Equip Co, C/st, LBR-170, (2) #Z523700
- Manufacturer: Unknown
(2) Mixer Agitators by Mixing Equipment Co., Model LBR-170 - Two agitators with 125 HP each, 24.67:1 ratio, and 48 RPM outlet. Includes Westinghouse 125 HP, 460V direct-drive motors. Serial numbers 752100, 101, 1...
San Dimas, CA - Trusted Seller

Mixer, Agitator, 1/3 HP, Nettco, S/st, NSDF1/3 (2) #S730877
- Manufacturer: Nettco
(2) Nettco agitator mixer, 1/3 HP, stainless steel. Unit is model NSDF 1/3, has 7/8" diameter x 3' long stainless steel shaft, less prop. Mixer is 1/3 HP 90 volt DC drive. Mixer is flange mounted with approx. 10"...
San Dimas, CA - Trusted Seller

Customized 600 USG mixing tank with sweep and disperser agitator
- Manufacturer: Hongda
600 USG working capacity Surface #4 finish. Heat transfer surface: Side and bottom stainless steel dimple jacket for water/oil heating/cooling with ASME stamp at 75 Psi. Insulation: Rock wool 2" thick. Triple Ag...
Ontario, CA - Trusted Seller

Mixer, Planetary, 18 Gallon, Ross, Model CDA-18, Dual Agitation #5475821
- Manufacturer: Ross
Ross Dual Shaft Mixer Model CDA-18 : SN 755545, change can dual shaft mixer and disperser. Air/oil hydraulic lift. Includes an air/oil supply tank, and hydraulic lift cylinder to raise and lower agitators from mi...
California, USA
