Used Processing in Victoria, Australia

SYNTRON V51-D1
- Manufacturer: SYNTRON
Vibrating motor with a mild vibrational force, runs well, 240Volt single phase.
Melbourne, Australia
SEW FH 107
- Manufacturer: SEW-Eurodrive
SEW hollow shaft geared motor. Model FH 107. Hollow shaft 90mm shrink disc fitting. Motor KW 18.5. 415v/3/50hz Final RPM 34. Unit unused.
Melbourne, Australia
F.A.MAKER 1000L SS
- Manufacturer: F.A.MAKER
NEW - 1000L Stainless steel ribbon blender. This units is great for blending dry powders and even slurries. They blend in a cross flow method by moving product in both directions at the same time. Product is fed ...
Melbourne, Australia
BYRNE & DAVIDSON S/S 1000
- Manufacturer: Byrne
Tumbler or Cube Mixer - Blender, 1 cubic meter. All stainless steel contact parts. Mixer is 1.2 x 1.2 x 1.2 outlet 150mm inlet 200mm complete with a 5.5kw varispeed drive with solenoid brake. Mix approx 500kg pro...
Melbourne, Australia
SS Kettle
Scraped surface mixer bowl Size 750mm dia x 400mm deep, 70Litres, jacketed stainless bowl and variable speed drive. Needs attention.
Melbourne, Australia
SCOTT GOSSELIN 10000
- Manufacturer: SCOTT GOSSELIN
Stainless Steel butter churn, 10,000L Bowl size, 35Hp Motor Dimensions of the bowl 2.6m dia x 2.0m deep. Unit runs very well.
Melbourne, Australia
KARL SCHNELL FLM2
- Manufacturer: Karl Schnell
Karl Schnell triple stage emulsifier. Running a 37KW 1450 RPM motor fitted on a stainless steel frame. Unit has stainless steel wetted parts and an adjustable cutting head, currently setup with a 4mm dia hole siz...
Melbourne, Australia
PRESIDENT Type 12
- Manufacturer: PRESIDENT
12 x Swinging hammers 5 inch long. Mill has a 2mm screen. Main drive is a 11kw 1460 RPM motor belt driven. Feed inlet size is 100mm x 100mm
Melbourne, Australia
CUMBERLAND 20
- Manufacturer: Cumberland
- Model: 20
Granulator suitable for plastic sheets, 20inches wide with 24 blades, conveyor fed, dual rollers, belt driven, spare parts included,
Melbourne, Australia
PLESSY 2H24CX
- Manufacturer: PLESSY
Hydraluic powerpack, 15L tank, 7,5hp drive.
Melbourne, Australia
APV Products HP/Industry 16.51H
- Manufacturer: APV Products
YOM: 1993 Was last used for Photographic Emulsion Capacity: 300-400 L/Hr Inlet Pressure: 3-10 Bar (low speed viscosity-high speed viscosity) Max Pump Pressure: 800 bar Cooling Water Volume: Eccentric Oil 90 l/hr ...
Melbourne, Australia
SS Tube Heat Exchanger
Monotube Jacketed St/Steel heat exchanger. 7 m long Internal bore 70mm. External Diameter 100m. Last used to Heat Chocolate.
Melbourne, Australia
Heat Exchanger
Mild Steel Heat Exchanger. 900mm long x 250 diam. With internal coil. Inlet 100 outlet 45mm.
Melbourne, Australia
ALFA LAVAL IV
- Manufacturer: Alfa-Laval
500mm dia spiral heat exchanger s/steel contact parts 60mm ports built in 1987, rated at 5bar D.P and 100 deg cel. 4.4m2 Heating surface.
Melbourne, Australia
ALFA LAVAL A-15BWFG
- Manufacturer: Alfa-Laval
Plate heat exchanger, Pressure 8 Bar, Temp 150degC, YOM:1994, 88plates, 6inch ports.
Melbourne, Australia