Used Drilling Rigs

1990 CANTERRA CT-350 AUGER DRILL RIG #2596T

Manufactured 1990, auger has updated hydraulic pump for controls, long tower, 3 winches, including jib winch, sandline with rapid reverse (used to drive pipe into ground), 10,000 lb torque tophead, drillers platf...

SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG #5453Tc

• Manufacturer: Simco

Diesel engine, cathead, track mounted, no auto hammer Price: $57,500

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

1995 MOBILE B47 AUGER DRILL RIG #619Tb

Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500

UNIFLEX DRILLING RIG PACKAGE #4478T

102’ x 250,000# Uniflex telescoping derrick, substructure, catwalk, V-door, 60 Series Detroit engine, upper doghouse/water tank combo, combination shack with tool room/change room and (2) 100kva genset, mud tank ...

1977 INGERSOLL RAND T4W DRILL RIG #3552T

• Manufacturer: Ingersoll Rand
• Model: T4W

Manufactured 1977, no air compressor mounted on rig (cooler and piping still on rig), Detroit 8V71 deck engine, mounted on Crane Carrier with 6V53 Detroit engine, traction tires on rear and floatation tires on fr...

CABOT 750 DRILLING RIG #1125T

• Manufacturer: Franks Cabot

Cat 3412 engine with Allison 5860 transmission, 1-1/8 drilling line, 96’ x 300,000# derrick, mounted on 5 axle carrier, 4-sheave McKissick block, standpipe, kelly hose with sub and ramp, 27-1/2” rotary table Pric...

CHALLENGER 360 DRILL RIG #836T

Challenger 360 drawworks (500 HP) (rated to 6,500' with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84' H - 300,000# SHL derrick,, 10' adjustable substructure, HT - 18" x 44" rotary tabl...

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

2010 #EDM 2000 SLIDING ANGLE MAST DRILL RIG 7472Tc

Year 2010, mounted on 2019 International 7500 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,0...

1984 INGERSOLL-RAND CM351

• Manufacturer: Ingersoll Rand
• Model: CM-351

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

1999 CASAGRANDE B130 HYDRAULIC DRILL RIG #4684Tb

• Manufacturer: Casagrande

Configured for CFA and rotary, year 1999, Cat 3116T diesel engine (104kw), approx 27,000 hours, max torque 108 kNm, mounted on Cat 320 on Sempirana tracks. CFA: 1000mm max diameter, 17.5m (12m + 6m kelly extensio...

Ingersoll Rand CM-351 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-351

Good condition Ingersoll Rand CM-351 Drilling Rigs available between 1985 and 1999 years. Located in USA and other countries. Click request price for more information.