Used Mills (Mineral Processing)

2 Units - UNUSED FLSMIDTH 22' x 36.5' (6.7m x 11m) Ball Mills with Dual 5,075 kW (6,806 HP) Motor Drives for a total of 10,150 kW (13,6611 HP)

• Manufacturer: FLSmidth

2 Units - UNUSED FLSMIDTH (Fuller Traylor) 22' x 36.5' (6.7m x 11m) Ball Mills, each with Dual 5,075 kW (6,806 HP) Motors for a total of 10,150 kW (13,611 HP) & ACS6000 ABB Variable Frequency Drives (2) Each 22' ...

Allis Chalmers 5ft Dia. x 16ft Long Ball Mill

• Manufacturer: Allis-Chalmers

Guarding Falk Lubrication System Size: 5ft Diameter x 16ft Long | Liners: New, Unused Liners | Feed: Spout Fed | Discharge: Overflow with Trommel Screen on Output | Frame: I-Beam Frame | Drive: GE Reconditioned E...

Allis Chalmers 8ft Dia. x 10ft Ball Mill

• Manufacturer: Allis-Chalmers

Additional Notes: Shell Was Drilled to Allow Wider Shell Rubber Plates Main Bearings are Grease Blocks Spare Parts Available 1x Feed End Trunnion Liner 1x Discharge End Trunnion Liner 1x Trunnion Babbitt Insert 1...

8ft. Dia. x 8ft. Long Allis Chalmers Ball Mill

• Manufacturer: Allis-Chalmers

Complete with Motor and Drive Westinghouse 400 HP Motor 575 Volt 348 RPM Welded Steel Shell Cast Steel Feed & Discharge Heads Herringbone Ring Gear & Guard Pinion Shaft Assembly Main Bearing Spare Feed End Trunio...

Ball mill grinding media,

Ball mill grinding media 3” to 5” Sold by the ton Price including freight is available Contact us for pricing

3ft x 3ft Allis Chalmers Ball Mill

• Manufacturer: Allis-Chalmers

Size: 3ft Dia. x 3ft Long | Capacity: 30 TPD | Feed type: Scoop Feed | Discharge: Overflow Discharge | Liners: Rail Lined, 40% Life Remaining | Drive: Electric Motor | Power output: 30HP | Voltage: 220/440 Volt ...

Mill, Ball, Batch, 4' X 5', Patterson, Porcelain, #Z501500

• Manufacturer: Patterson

Patterson pebble mill, paint mill, 48" diameter X 54" long, porcelain lined, full charge of assorted sized pebbles, draw off valve opposite loading door, mounted on stand. Includes tiles that are in good conditio...

Mill, Ball, Batch, 6' X 5', Jkt, Porcelain, #Z501254

• Manufacturer: Patterson

Patterson porcelain lined pebble mill, paint mill, measures 6' diameter x 5' long. Shell is jacketed and rated for 35 PSI. Set up as combination running and discharge door. Includes some grinding media. Lining ne...

Ball Mills 12ft 21ft, Two mills available, Metso used ball mills

• Manufacturer: Metso

Metso Horizontal ball mills 12ft x 21ft, two mills available BALL MILLS HAVE BEEN DISMANTLED AND READY TO LOAD ONTO TRUCKS!! POWER: 1600 hp & 1194 RPM CLUTCH: Eaton Airflex 38VC1200 , Dual wide SPEED REDUCER:...

Base for bearing and against shaft of ball mill

Base for bearing and against shaft of ball mill Bearing base Counter shaft of ball mill Used

Mill, Batch, 2'6" X 3'6", Patterson, 5 HP, Carbon Steel, Jacketed, #S485829

• Manufacturer: Patterson

Patterson Steel paint mill, 32" diameter X 42" long, with approx 65 gallon working capacity, batch type mill. Mill is jacketed for 14 PSI as cooling jacket. Unit rated 128 gallons total capacity. Unit is complete...

Mill, Ball, 11' x 14', Hardinge-Koppers, No motor #D740104

• Manufacturer: Hardinge

Hardinge-Koppers Ball Mill, 11' x 14', no motor. Includes mill shell, bull gear, feed and discharge heads with trunnion liners, shell liners, and gear covers. Trunnion journals measure 48" diameter x 15" wide.

Marcy brand 6x6 FT ball mill

• Manufacturer: MARCY

Marcy brand 6x6 FT ball mill Manufacturer: Marcy Electric motor 100 HP 8 Poles 890 RPM 440V synchronous New armor set New hardware Pinion in good condition Used, with service Packing list: QTY UDM 1 PART 1 PART S...

used 8ft x 17ft+ KVS Ball mills, Three mills available, 400 HP, Air clutch, Lube System

• Manufacturer: KVS- Kennedy Van Saun

2 Kennedy Van Saun used ball mills available , Rubber liners- can be converted to steel liners Air Clutches Main Gears and Pinion Gears- single helical Rubber liners- can be converted to steel liners A grate...

UsedMetso ball mills 12’ x 21’ , Two Metso ball mills available

• Manufacturer: Metso

Metso Horizontal ball mills 12ft diameter x 21ft, two mills available The ball miIls have been dismantled and are stored in the storage yard and ready to load with the crane at no cost! SPEED REDUCER: Metso Drive...