Used Processing in Louisiana, USA

Qual- Tech Model 2 x 200 MM Processing Head

Qual-Tech Manufacturing Model 2 x 200 mm Processing Head Model number- S120-200MM PE Drawing number- QTMS2-120-200MM Type head- dual parison head with 200 mm distance between dies Head made to process polyethylen...

Marley Cooling Tower with Pump Deck and Process Systems Control Panel

Marley Cooling Tower with Pump Deck and Process Systems Control Panel Year of manufacture- 2016 Start up date- 06/02/2016 Model number of Cooling Tower- 10120873 Serial number of Cooling Tower- 671 Tonnage of Coo...

Process Engineering and Equipment Cooling Tower Water Pump Assembly with Heat Exchanger

Process Engineering and Equipment Cooling Tower Water Pump Assembly with Heat Exchanger Year off manufacture- 2011 Skid mounted system Skid designed to allow for top mounting of reservoir tank (2) Gould Model G&L...

Process Systems Cooling Tower Water Pump Assembly with Tank and Cooling Water Filtration System

Process Systems Cooling Tower Water Pump Assembly and Cooling Water Filtration System Skid mounted system (2) tower process water pumps- 60 horse power each with 1000 gpm flow at 175’ TDH 450 gallon plastic roto ...

Novatec Model NWB-25 Material Dryer and Novatec Model 60# HPR Insulated Hopper

• Manufacturer: Novatec

Novatec Model NWB-25 Material Dryer and Novatec Model 60# HPR Insulated Hopper Material flow- 25 pounds per hour Water Inlet/Outlet- 3/8” Flow rate- .25 gallons per minute Controls- Novatec Model NovaTouch Color ...

2010 York YCIV 157

• Manufacturer: York

Equipment condition: Rebuilding Process | Voltage and phase: 460 Volt 3 Phase | Condenser type: Air-cooled | Refrigerant type: R-134A

2012 Trane RTAC155

• Manufacturer: Trane

Equipment condition: In the rebuilding process | Voltage and phase: 460 Volt 3 Phase | Compressor type: Screw | Condenser type: Standard with low ambient | Refrigerant type: R-134

2001 Trane RTAA 70

• Manufacturer: Trane

Reconditioned and comes with a warranty. Equipment condition: In the rebuilding process | Voltage and phase: 460 Volt 3 Phase | Compressor type: Screw | Condenser type: Air Cooled | Refrigerant type: R-407

Derrick DE-1000 FHD Centrifuge

• Manufacturer: Derrick

www.VIDAEQ.com 🔥 Derrick DE 1000 FHD Decanter Centrifuge This package was refurbished in October 2023. It has been lightly used since then 👉 Viewing this on Machinio? Then follow this link to view the full Equi...

ICE Machine

This listing consists of lot numbers: Z9 Includes: 1 Cornelius Ice Machine CONDITION IS NOT GUARANTEED. REPAIRS MAY BE REQUIRED. THE ABSENCE OF ANY MENTION OF DEFECTS DOES NOT MEAN THERE ARE NONE. WE STRONGLY ENC...

500 Gal Perry Receiver, 304 S/S, 75/75#

• Manufacturer: Perry Products

500 Gal Perry Receiver, 304 S/S, 75/75# Used 500 gallon Perry Products receiver, 304 stainless steel construction, approximately 48" diameter x 60" straight side, dished top and bottom, rated 75 PSI and full vacu...

Hoshizaki F-300BAF

• Manufacturer: Hoshizaki
• Model: F-300BAF

As Is, Where Is Ice Machine, Hoshizaki, F-300BAF, Qty 1 -AC Supply Voltage: 115-120/60/1 -9.0 AMPS -Design Pressure: HI- 460PSI / LO- 290PSI -Refrigerant: 404A (9.5oz) Condition: Does not make ice. Faulty ice dump.

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine

• Manufacturer: Siapi

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine Year- 2005 Number of mold cavities- 2 (can go up to 4) Neck finish- Currently set up for 43 mm Bottles per minute- 30 Currently processing 1-gallon...

2004 Thermal Care (30) ton Water Cooled Chiller

• Manufacturer: Thermal Care

2004 Thermal Care (30) ton Water Cooled Chiller Type- Water cooled Capacity- 30 ton Compressor- (2) 15 horse power Process pump (1) 10 horse power Year- 2004 Condition- very good

Hoshizaki F-300BAF

• Manufacturer: Hoshizaki
• Model: F-300BAF

Ice Machine, Hoshizaki, F-300BAF, Qty 1 -AC Supply Voltage: 115-120/60/1 -9.0 AMPS -Design Pressure: HI- 460PSI / LO- 290PSI -Refrigerant: 404A (9.5oz) Condition: Does not make ice. Faulty ice dump.