Building Filters

Used handling tools

LOOPCO 15T COIL CAR , USED COIL CAR
- used
- Manufacturer: Loopco
Inventory id: 20087500000 | Capacity: 15T | Type (below ground / above ground): ABOVE GROUND | Motorized/non-motorized: MOTORIZED | Coil od: 60" | Coil width: 60" | Coil lift height: 20" ESTIMATED | Hydraulic li...
Pittsburgh, PA
10 TON LOOPCO COIL CAR (NCO), USED COIL CAR
- used
- Manufacturer: Loopco
Inventory id: 10874200000 | Capacity: 10 | Type (below ground / above ground): L-SHAPED | Motorized/non-motorized: MOTORIZED | Coil width: 43 | Overall length: 75 | Overall width: 34 | Overall height: 48 | Featu...
Pittsburgh, PA
Trusted Seller
LOOPCO 40,000 LBS X 54" RECOILER
- used
- Manufacturer: Loopco
40,000 lBS x 54" recoiler 200 HP DC MOTOR Stock #14242 Used 40,000 Lbs x 54" Recoiler Stock # 14242 -40,000# Capacity -Year 1974 -54" Wide -16" Dia. x 58" Face Drum -20" Dia. Bolt On Pad -22" Dia. x 57" Face Spar...
North Branford, CT
Trusted Seller
20,000 Lb LOOPCO COIL CAR (13782)
- used
- Manufacturer: Loopco
20,000 Lb LOOPCO COIL CAR (13782) MACHINE 13782 MANUFACTURER: LOOPCO SPECIFICATIONS:Maximum Coil O.D.: 72" Hydraulic Lift Motorized - Driven Coil Capacity 20,000 Lbs. Wheels are 48" on centers. **Temporary Specif...
North Branford, CT
Trusted Seller
LOOPCO 40,000# x 54" Recoiler (14523)
- used
- Manufacturer: Loopco
40,000 LBS X 54" LOOPCO RECOILER STOCK # 14523 -40,000# Capacity -54" Wide -16" Dia. x 58" Face Drum -20" Dia. Bolt On Pad -22" Dia. x 57" Face Spare Drum -Hydraulic Clamp and Expansion -12" Dia. Main Shaft -Hydr...
North Branford, CT
Trusted Seller
LOOPCO 20,000 LB X 52" UNCOILER/PAYOFF
- used
- Manufacturer: Loopco
Get this used 1976 Loopco Uncoiler/Payoff now. Model 20,000 Lb x 52" rated with a 53" Mandrel face width, 16"-20" Coil I.D. range, 4 Segment mandrel, AC Motor threading drive with Air Clutch, and a Wichita Water ...
North Branford, CT
Trusted Seller
LOOPCO 20,000 Lbs
- used
- Manufacturer: Loopco
20,000 Lbs X 30" LOOPCO UNCOILER (14090) STOCK # (14090) -20,000 lbs. Capacity -30" Face, 4 Segment Mandrel -15" - 19" Expansion Range -Hydraulic Wedge Type Expansion -5.5" Dia. Main Shaft -Hydraulic Motor Thread...
North Branford, CT
Trusted Seller
10,000 LBS LOOPCO UPENDER (USED)
- used
- Manufacturer: Loopco
Specifications: Manufacturer: Loopco Weight Capacity: 10,000 Lbs. Bed: 60" x 36"
United States
Trusted Seller
Tension Stand, Loopco, 48" Wide (Used)
- used
- Manufacturer: Loopco
48" Loopco Drag Wipe Tension Stand -Pad Type -Air Bag for Pressure (Less Air Bag) -Entry Separator Tooling Bar, 52" Wide -Passline: 52" -Overall Size: 64" L x 24" W x 63" High 2,300 Lbs. -In Storage
United States
Trusted Seller
58" x 50,000 Lb. Loopco Recoiler (Used)
- used
- Manufacturer: Loopco
58" x 50,000 Lbs. 20" Diameter Hydraulic Drum with Gripper (R to L) 24" Pads 100 HP Motor
United States
Trusted Seller
Tension Stand, Loopco (Used)
- used
- Manufacturer: Loopco
Manufacturer: Loopco Type: Pad Tension Width Capacity: 54" wide
United States
Trusted Seller
72" x 60,000 Lb. Loopco Cone Uncoiler with Pit Type Coil Car (Used)
- used
- Manufacturer: Loopco
Cone Uncoiler with Pit Type Coil Car 72 x 60,000 Lbs. 16"-32" I.D. 72" O.D. Max. With Stationary Coil Elevator
United States
Trusted Seller
80” x 3/8” STUB ARBOR INLINE SIDE TRIMMER
- used
- Manufacturer: Loopco
MANUFACTURER – LOOPCO (BRANER) YEAR – 1983 MODEL NUMBER – 6158A LINE DIRECTION – LEFT TO RIGHT LINE SPEED – 295 FPM MAX. STRIP THICKNESS - .375” (3/8”) COIL WIDTH INCOMING – 82” MAX MAXIMUM CUT WIDTH – 80”...
United States
Trusted Seller
30″ x 15,000Lb Loopco Recoiler
- used
- Manufacturer: Loopco
Your cut to length and slitting lines can be equipped with Loopco Recoiler for work Powered Hold-Down Roll Sliding Base Powered Expansion 75HP DC Motor
Poland
18" LOOPCO UNCOILER : STOCK #51773
- used
- Manufacturer: Loopco
WITH VICKERS HYDRAULIC PUMP Stock#: 51773 | Mandrels: (4)18" W/GUIDE ROLLERS
Holland, OH