Used Machine Tools in Saxony, Germany

WMW bearing pedestal

• Manufacturer: WMW

Lagerbock, Gegenlager für Frässpindel WMW Ø 70 mm x 150 mm Abstand Spindelmitte - Oberkante Schwalbenschwanz: 150 mm Schwalbenschwanzführung: 200 / 155 mm, Höhe: 30 mm, Breite: 135 mm gebraucht, geprüft !

HEIDENHAIN Digital Position Display

Digitale Positionsanzeige, 2 - Achsen HEIDENHAIN VRZ 735 228 418 01 100 - 240 V 56 - 60 Hz ca. 1,6 m Netzkabel ( fest verklemmt ) gebraucht, geprüft !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW 56 mm x 63 mm Distance from spindle center to top edge of dovetail: 63 mm Dovetail guide: 192 / 166 mm, height: 17 mm, width: 75 mm Used, tested!

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW 48 mm x 94 mm Distance from spindle center to top edge of dovetail: 94 mm Dovetail guide: 193 / 178 mm, height: 16.5 mm, width: 84 mm Used, tested!

BIKON clamping set

• Manufacturer: BIKON

Clamping set, flange with clamping cone, in a set BIKON, RINGFEDER 15 clamping sets for shaft diameters: 1 x 20 mm, 1 x 22 mm, 3 x 25 mm, 1 x 28 mm, 2 x 30 mm, 1 x 35 mm, 5 x 40 mm, 1 x 45 mm Set consists of 15 c...

SANDVIK ER collet chuck

• Manufacturer: Sandvik

ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A New !

PAGUS storage rack

• Manufacturer: Pagus

Diameter Roll distance: 235 mm | Roll diameter: �� 40 mm | Effective width: 365 mm | Working height: 490 mm | Foot: 450 x 380 mm | Dimensions: 400 x 155 x 280 mm

MZ coolant filter system

• Manufacturer: FILTER TECHNOLOGY WEIDA

Coolant filter system, coolant system, filter system MZ, FILTERTECHNIK WEIDA EMA 200 Engine: MS562-4 0.09 kW 1320 rpm 220/380 V 3AC Transmission: K&S PG056 MEZ BRNO 4AP71-2S 0.37 kW 2800 rpm 220/380 V 3AC IMB14-7...

RINGSPANN Hydraulisch betätigter Bremssattel

Hydraulisch betätigter Bremssattel, federgelüftet RINGSPANN HPW40R Bremsscheiben mit unterschiedlicher Dicke einsetzbar, da Zwischenstück anpaßbar gebraucht, geprüft !

PAGUS side-hung window

• Manufacturer: Pagus

Drehfenster, Spin Window PAGUS 8x Gewindebohrung: M5 x 0,8, Tiefe: 15 mm gebraucht, geprüft !

PAGUS timing belt pulley

• Manufacturer: Pagus

Timing belt pulley, timing belt pulley PAGUS �� 194 x 100 mm Matching timing belt - see S2159 ! New!

WMW clamping device

• Manufacturer: WMW

Clamping fixture, drilling fixture, quick release, clamp WMW, VORRICHTUNGSBAU HOHENSTEIN 100 x 125 TGL 30-10206 For further clamping fixtures, see MMZ602, MMZ603, MMZ719, MMZ720! Used, tested!

WMW clamping device

• Manufacturer: WMW

Clamping device with 3-jaw chuck, three-jaw chuck WMW Three-jaw chuck: DH - A - 200 x 3 TGL 30-2332 Used, tested!

PAGUS Luenette

• Manufacturer: Pagus

Lunette, steady rest, steady rest, fixed PAGUS Internal diameter: �� approx.�� 70 mm | Peak height: about 180 mm | Thickness: 50 mm | Center wedge to end support: 150 mm | Dimensions: 400 x 340 x 85 mm

DEUBLIN rotary union

• Manufacturer: Union

Drehdurchführung für Kühlflüssigkeit DEUBLIN 1139-022-301 295910 X0603 max 140 bar max 28 l/min max 30.000 U/min Neu !