Used Machine Tools in Saxony, Germany

FIBRO Rundtisch

Rotary table FIBRO GmbH FIBROPLAN Type: NC0.04.0470.0.1.01.00 As good as new !

HEIDENHAIN Digital Position Display

Digital position display, 2 axes HEIDENHAIN VRZ 735 228 418 01 100 - 240 V 56 - 60 Hz approx. 1.6 m power cable ( firmly clamped ) used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 63 mm Distance spindle center - upper edge of dovetail: 63 mm dovetail guide: 192 / 166 mm, height: 17 mm, width: 75 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 48 mm x 94 mm Distance spindle center - upper edge of dovetail: 94 mm dovetail guide: 193 / 178 mm, height: 16.5 mm, width: 84 mm used, tested !

BIKON clamping set

• Manufacturer: BIKON

Clamping set, flange with clamping cone, as a set BIKON, RING SPRING 15 clamping sets for shaft diameters: 1 x Ø 20 mm, 1 x Ø 22 mm, 3 x Ø 25 mm, 1 x Ø 28 mm, 2 x Ø 30 mm, 1 x Ø 35 mm, 5 x Ø 40 mm, 1 x Ø 45 mm Se...

SANDVIK ER collet chuck

• Manufacturer: Sandvik

ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A New !

PAGUS storage rack

• Manufacturer: Pagus

Storage shelf, with fixed castors PAGUS 3 screw feet used, tested !

MZ coolant filter system

• Manufacturer: FILTER TECHNOLOGY WEIDA

Coolant filter system, coolant system, filter system MZ, FILTERTECHNIK WEIDA EMA 200 Motor: MS562-4 0.09 kW 1320 rpm 220 / 380 V 3AC Gearbox: K&S PG056 MEZ BRNO 4AP71-2S 0,37 kW 2800 rpm 220 / 380 V 3AC IMB14-71x...

PAGUS side-hung window

• Manufacturer: Pagus

Spin window PAGUS 8x threaded hole: M5 x 0.8, depth: 15 mm used, tested !

PAGUS timing belt pulley

• Manufacturer: Pagus

Toothed belt wheel, toothed belt pulley PAGUS Ø 194 x 100 mm matching toothed flat belt - see S2159 ! New !

WMW clamping device

• Manufacturer: WMW

Clamping device, drilling device, quick clamp, clamp WMW, FIXTURE CONSTRUCTION HOHENSTEIN 100 x 125 TGL 30-10206 for further clamping devices see MMZ602, MMZ603, MMZ719, MMZ720 ! used, tested !

WMW clamping device

• Manufacturer: WMW

Clamping device with 3-jaw chuck, three-jaw chuck WMW Three-jaw chuck: DH - A - 200 x 3 TGL 30-2332 used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS Internal diameter: Ø approx. 70 mm | Tip height: about 180 mm | Thickness: 50 mm | Center wedge to end support: 150 mm | Dimensions: 400 x 340 x 85 mm

DEUBLIN Rotating union

• Manufacturer: DEUBLIN

Rotating union for coolant DEUBLIN 1139-022-301 295910 X0603 max 140 bar max 28 l/min max 30.000 rpm New !

HAINBUCH clamping head

• Manufacturer: HAINBUCH

Clamping head HAINBUCH SB.K.0173 3807222001 Span diameter: Ø 60.3 mm | Dimensions: 154 x 154 x 60 mm