Building Filters

Used headers

Trusted Seller
Asahi Okuma AT-635 2D/2B Cold Header
- used
- Manufacturer: Okuma
SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * TONS of TOOLING!!
Byron, IL
Trusted Seller
Nakashimada PF-860 2D/3B Cold Header 5/16″
- used
- Manufacturer: Nakashimada
8mm NAKASHIMADA PF-860 2-DIE/3-BLOW COLD HEADER WITH FINGERLESS TRANSFER SPECIFICATIONS: MAX. 1 ST MAX. 2 ND MAX. PRODUCTION RATE: 50 – 120 PPM FEATURES: POSITIVE KNOCKOUT IN 2 ND & 3 RD PUNCH DIE RELIEVING KNOCK...
Byron, IL
Cold Header 3 mm, 1 Die 2 Blow P-371 AP
- used
“Good Usable Condition- May Require some attention” Cold Header 3 mm, 1 Die 2 Blow Make: Ayase Model AS-OH Serial #: 53602 This machine has been covered and protected but it was outside. Although the owner believ...
$4,500 USD
Bay Shore, NY
Trusted Seller
2015 5/8" x 5" National HS LS-DSSD Warm Header
- used
Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...
Rockville Centre, NY
10mm Jern Yao – JBF-13B4S 4D4B Boltformer
- used
- Manufacturer: Jern Yao
CUT-OFF DIA. MAX (mm) 10 CUT-OFF LENGTH (mm) 26~105 KICK-OUT LENGTH MAX. (mm) 90 P.K.O. LENGTH MAX. (mm) 20 CUT-OFF QUILL (DxL) (mm) 35×56 MAIN DIE HOLE (DxL) (mm) 60×105 DIES PITCH (mm) 87 PUNCH HOLE (DxL) (mm) ...
Posen, IL
Trusted Seller
National
- used
- Manufacturer: National
DOUBLE STROKE SOLID DIE COLD HEADER Capacity: 3/16X1" | Cutoff diameter: 3/16" | Shank length: 1" | Cutoff length: 1-3/4" | Speed: 225 Pieces per Minute | Weight,approx: 4,100 Lbs.
Vaughan, Canada
Trusted Seller
1977 NAKASHIMADA H-20AU
- used
- Manufacturer: Nakashimada
DSSD COLD HEADER Maximum Wire Diameter: 6.0mm (.237") Maximum Cut-Off Length: 70mm (2.755") Max Shank Length: 55mm (1.968") Production Speed: 180-200ppm Main motor: 7.5hp Net Weight,approx: 7,500 lbs
Vaughan, Canada
Trusted Seller
1996 ASAHI OKUMA AT-635
- used
- Manufacturer: Okuma
- Model: AT-635
2 DIE 2 BLOW COLD HEADER * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * LOTS of TOOLING
Vaughan, Canada
Trusted Seller
1993 NAKASHIMADA NP-40
- used
- Manufacturer: Nakashimada
2 DIE 3 BLOW COLD HEADER Cutoff Diameter Range: 2.5mm - 4mm Max Cutoff Length: 25mm Max. Shank Length: 30mm Max. Transferable Length: 35mm Die Kickout (1st): 50mm Die Kickout (2nd): 30mm Max. PKO Stroke: 15mm O...
Vaughan, Canada
Trusted Seller
Morris 0RC-23A
- used
- Manufacturer: Morris
Find many great new & used options and get the best deals for MORRIS OMEGA COLD HEADER MODEL 0 RC-23A 2MM .0787" ITALY IN EXCELLENT COND.. Free shipping for many products!
Orange, CA
Trusted Seller
Header Cold Hilgeland CF5AZ
- used
- Manufacturer: Hilgeland
- Model: CF5AZ
2 Die – 3 Blow Transfer Header, Bushing cut-off Diameter range : 16 mm, Number of dies : 2, Number of stations : 4, Output-pieces/min : 100, Shaft length under head : 130 mm, Cutting length : 160 mm, Weigh...
Europe
Trusted Seller
Header Cold Hilgeland CH6V
- used
- Manufacturer: Hilgeland
- Model: CH6V
Double Blow Header, Diameter range : 10-20 mm, Shaft length under head : 180 mm, Cutting length : 230 mm, Output - pieces/min : 45/50/56, Press power : 160 ton, Plane of stroke : 240 mm, Weight : 25 tons, ...
Europe
Double blow header and threading Sacma KSP 01R
- used
- Manufacturer: Sacma
Double strike press with rolling station SACMA KSP 01 R Year 1995 Number of dies 1 Cutting diameter (500N/mm²) 5 Cutting length (max) mm 57 Die ejection (max) mm 40 Punch ejection (max) mm 6 Thread (max) 8...
France
Trusted Seller
Header Progressive Bolt Makers BM20
- used
- Manufacturer: National
Diameter range: 24 mm, Number of dies: 4, Max. Punch k.o. Stroke 30 mm Min/max. Cutoff of length : 50/200 mm, Die k.o. Stroke : 30/155 mm, Max thread length : 75 mm, Min. Bolt with thread m-16 x 50 din 933,...
Europe
Trusted Seller
1-1/8" Hasenclever WSHK-100 w/Ajax pwr spl, 80kW Toccotron
- used
- Manufacturer: Hasenclever
Specs: 100 tons of Upsetting Force 125 tons of Gripping Force Total stroke of header slide: 180mm Effective Upsetting stroke: 112mm Stroke of top gripping jaw: 85mm Dimension of gripping jaws: height of one jaw: ...
Rockville Centre, NY