Used Lock Inspection Systems Metal Detectors

Metal Detector Lock Inspection Systems

• Manufacturer: Lock Inspection Systems

This equipment works by conductivity and magnetism detection, it is able to identify and signal metallic particles in a specific area. Features

Lock Inspection System MET 30

• Manufacturer: Lock Inspection Systems
• Model: MET 30

metal detector. like new. tested in running condition. No ejection. belt approx 320 mm wide.

2010 Lock Metaaldetector 30+

• Manufacturer: Lock Inspection Systems

Detects: 2mm stainless steel / st 2mm aluminum 2mm New conveyor belt blue Speed controller

Lock Metaaldetector, type: MET30 +

• Manufacturer: Lock Inspection Systems

Metal detector of the brand Lock, type MET30 +, including fall-through / attachment link.

LOCK INSPECTION SYSTEMS MET 30+

• Manufacturer: Lock Inspection Systems
• Model: MET 30

MET 30+ metal detector manufactured by LOCK INSPECTION SYSTEMS.

LOCK INSPECTION SYSTEMS MET 30+

• Manufacturer: Lock Inspection Systems
• Model: MET 30

MET 30+ metal detector manufactured by LOCK INSPECTION SYSTEMS.

LOCK INSPECTION SYSTEMS MET 30+

• Manufacturer: Lock Inspection Systems
• Model: MET 30

MET 30+ metal detector manufactured by LOCK INSPECTION SYSTEMS.

2023 LOCK IQ 4 1857

• Manufacturer: Lock Inspection Systems

New vertical metal detector Equipped : - Vertical ramp in food pvc for the passage of the product with entry cone - Outlet ramp with diverter if detection of metallic particles in product through 2 different port...

Lock Metal Chek Conveyorized Metal Detector, Air Reject

• Manufacturer: Lock Inspection Systems

Lock Metalchek 9 Conveyorized Metal Detector, Approx. 10″ W X 6-1/2″ H

• Manufacturer: Lock Inspection Systems

1-Used lock metalchek 9 conveyorized metal detector, serial# 58492. Aperture measures approx. 10″ wide x 6-1/2″ high. Unit mounted on stainless steel stand and driven by eurodrive 3/60/230-460 volt variable speed...

Lock 29 ½ In. Wide x 21 In. High MET30+ Conveyorized Metal Detector

• Manufacturer: Lock Inspection Systems
• Model: MET30

1-Used lock inspection model met30+ conveyorized metal detector, s/n 42639/1. With aperture/opening measuring approximately 29 ½ in. Wide x 21 in. High, this metal detector was last operated with cases of fresh a...

Lock MET30+ Metal Detector, 14 In. W X 15 In. H Aperture

• Manufacturer: Lock Inspection Systems
• Model: MET30

LOCK Metalchek 30 CXE Metal Detector

• Manufacturer: Lock Inspection Systems

LOCK Metalchek Metal Detector - Model 30 CXE - Aperture: 14" L x 5" W - For Parts Only

LOCK 30 CXE Metal Detector + 3' Conveyor

• Manufacturer: Lock Inspection Systems

The LOCK 30 CXE Metal Detector is able to find metal contaminants as small as 0.15mm ferrous sphere. It can process up to 10,000 tablets a minute. It can hold 100 product set-ups in memory, up to 300 metal detect...