- Trusted SellerAuction
SALVAGINI sheet metal processing center with punching/bending/storage line
For sale is a fully automated, interlinked sheet metal processing center of the Salvagnini brand, consisting of: • P4L-3220 Lean bending machine (built in 2019) • S4Xe.40 punching and shearing unit (built in 2015...
Backnang, GermanyVisit Auction Website - Trusted SellerAuction
Fully automatic sheet metal processing system Salvagnini
- Manufacturer: Salvagnini
SN: 3000520, material infeed, buffer belt, lowering-bending unit, C-frame press, device no. 915168, output 43 kW, material outfeed belt, stacking unit, switch cabinet, control panel, grid enclosure, light barrier...
Metzingen, GermanyVisit Auction Website 
Sheet metal benders
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany- Trusted Seller
Karlsbad, Germany - Auction
SALVAGINI sheet metal processing center with punching/bending/storage line
For sale is a fully automated, interlinked sheet metal processing center of the Salvagnini brand, consisting of: • P4L-3220 Lean bending machine (built in 2019) • S4Xe.40 punching and shearing unit (built in 2015...
Backnang, GermanyVisit Auction Website - Trusted SellerAuction
Aalen, GermanyVisit Auction Website - Trusted Seller
2012 SCHECHTL KS 200
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany - Trusted Seller
1980 REIS TUS 60
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany - Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany 
Unrolling and splitting systems
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
- Power requirement: 3.2 kilowatt
Accessories tool cabinet with various punches and dies
Bühl, Germany
OBRU WAM
- Manufacturer: OBRU
- Power requirement: 0.18 kilowatt
With drive Manual central spreader Motor has only an on/off switch Brake mecanical Band loop control via dancer roller in start/stop mode The decoiler is running
Sinsheim, Germany
SCHWARZ HMH 3000
- Manufacturer: SCHWARZ
With flanged arms front and rear, 590 mm With flanged arms rear, sheet width 640 mm Without flanged arms, sheet width 690 mm 6 flanged arms Mechanical brake Hand crank included
Sinsheim, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
- Power requirement: 1.7 kilowatt
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
1973 REIS TUS 115 OK 40
- Manufacturer: Reis
- Model: TUS-115
- Power requirement: 5.5 kilowatt
Press force: 40 t | Stroke: 1100 mm | Distance between columns: 1150 mm | Side window: 705 mm | Daylight table - ram (stroke up): 1035 mm | Surface of table: 1280 x 900 mm | Table height above floor: 630 mm | Su...
Eislingen, Germany
Tip: Enter manufacturer, model or keyword