Used loader

Automatic Magnetic Tape Laying Machine with Auto Loader (MTL-700NSA)

Machine For Sheet To Sheet Application With Auto Loader Advantages The machine can operate at the highest possible speed. Material type and thickness can affect the speed at which you can run the machine. The pre...

2003 Used 100 Ton Wabash Hydraulic Molding & Laminating Inline Press

• Manufacturer: Wabash

Imperial Metric USED 100 TON WABASH HYDRAULIC MOLDING & LAMINATING INLINE PRESS NEW 2003 With loader & unloader Model AIL10010H0-4028-LX 4 post upstroke type; 10-opening; floor standing Daylight opening between 1...

2021 KBA 2021 RA106X-8+L SW4 SPC ALV3

• Manufacturer: KBA

Equipped with the following: Drupa-Version 2020 ErgoTronic Color Control ErgoTronic Lab ErgoTronic Color Quality Protocol QualiTronic Color Control QualiTronic PS0 Match QualiTronic Quality Pass QualiTronic Color...

1991 YAMAMOTO HE2-500-30W PLYWOOD HOT PRESS (MULTI-OPENING) [PO-010479]

• Manufacturer: YAMAMOTO

Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger...

1996 YAMAMOTO HE2-500-45WSA PLYWOOD HOT PRESS (MULTI-OPENING) [PO-010480]

• Manufacturer: YAMAMOTO

Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds cha...

5 Ton x 1/2″ 2-Post LOCKFORMER Mechanical Cut-Off Press #2251

• Manufacturer: Lockformer
• Capacity: 5,000 kilogram

2251 LOCKFORMER CTL-323 1/2 HP Motor Scrap Chute Die Set Feed Roll – 120 FPM Pull Out Roll – 127 FPM Manual Speed Control 4′ x 4′ x 4′ 2,500 Lbs. Universal Warehouse, Perrysburg, Ohio Our inventory is always chan...

2001 Breuning IRCO PROFIMAT 65.8 270.8

• Manufacturer: Breuning - Irco

Volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dqpihd Accessories, tools and clamping devices shown are only included in the scope of del...

1965 Buratto MARIO DI MAIO

3 insulated vents Serial number: Weight: Number of packages: 4 | Length: 1200 mm | Width: 450 mm | Min/max height: 1200 mm | Loader: - | Loader model: - | Magazine serial number: - | Operator books: - | Oil tank:...

Automatic Sheet Edge Trimming and Sheet Splitting Machine (GC-700BSA)

Designed specifically to cut and trim the two edges of a single sheet and split in halves. Features The GC-700BSA is designed specifically to cut and trim the two edges of a single or double sheet. It can also sp...

Automatic Collating Machine (GCM-1S)

For collating one or two overlay foils with one, two, or three cores Features The fully automatic plastic card gathering and collating system, GCM, has been developed in response to the demand for high speed auto...