Used Cnc Lathes in Lombardy, Italy

Trusted Seller
KITAMURA KNC 75D motorized 3-axis cnc lathe
- Manufacturer: Kitamura
Used KITAMURA KNC 75D motorized 3-axis cnc lathe The used KITAMURA KNC 75D motorized 3-axis cnc lathe is a fast and accurate small shooting CNC lathe, axis travel length 95/210mm (X/Z), bar passage 27mm, 10-posit...
Albairate, Italy
Trusted Seller
MURATEC MW 120G twin mandrel frontal cnc lathe
- Manufacturer: Muratec
Used MURATEC MW 120G twin-spindle frontal cnc lathe Used MURATEC MW 120G frontal twin-spindle cnc lathe is a fast CNC lathe equipped with 2 spindles (with AUTOBLOCK 210 chucks) and 2 separate turrets (with 8 posi...
Albairate, Italy
Trusted Seller
HARDINGE CONQUEST T51 motorized 3-axis cnc lathe
- Manufacturer: Hardinge
- Model: CONQUEST T51
Used HARDINGE CONQUEST T51 motorized 3-axis cnc lathe The used HARDINGE CONQUEST T51 motorized 3-axis cnc lathe is a rugged and precise CNC lathe with a medium-sized tilting bed, turning length about 500mm, bar p...
Albairate, Italy
Trusted Seller
L. PONTIGGIA 3 QG 750x15500 THREE SLIDES BED CNC LATHE
- Manufacturer: Pontiggia Leopoldo
Complete with: - n. 1 four jaws table Ø 1.200 mm. - n. 1 automatic square turret - n. 1 closed steady - n. 4 open steadies - n. 1 boring support
Arluno, Italy
Trusted Seller
Mori Seiki Lathe Zl150 SMC
- Manufacturer: Mori Seiki
- Model: ZL-150SMC
n. 1 Mori Seiki lathe model Zl150 SMC, year 2000 - ref. 1- Complete with Iemca Bar Loader Model Boss 545/32L year 2003It is noted that the lathe's CNC does not start due to a fault (likely board failure)CE Declar...
Milan, Italy
Trusted Seller
HAAS ST 30Y Y-axis motorized cnc lathe
- Manufacturer: Haas
- Model: ST-30Y
Used HAAS ST 30Y Y-axis motorized cnc lathe The used HAAS ST 30Y Y-axis motorized cnc lathe is a fast, medium-sized tilting-bed CNC lathe equipped with a tailstock, "C" axis spindle and a motorized Y-axis turret ...
Albairate, Italy
Trusted Seller
1998 CITIZEN CINCOM E32 sliding headstock lathe
- Manufacturer: Citizen
- Model: E32
Automatic sliding headstock lathe Bar passage: 32 mm. Max bar feed: 320 mm Max drilling/tapping: Ø 16mm/M12. Spindle speed: 130 to 6000 rpm. Main tool turret: 12 positions Secondary tool turret: 12 positions Moto...
Canegrate, Italy
Trusted Seller
2002 ERGOMAT A25 single-spindle lathe
- Manufacturer: Ergomat
- Model: A25
Single-spindle automatic cam lathe Max bar diameter: round 25 mm (1″) - hexagonal 22 mm - square 18 mm Distance between collet and tailstock: 240 mm Max turning length: 70 mm Max spindle rpm: 4000 rpm Production ...
Canegrate, Italy
Trusted Seller
GILDEMEISTER NEF 710 x 3000 CNC LATHE
- Manufacturer: Gildemeister
- Model: NEF 710
Retrofitted in 2008. Complete with: - n. 1 four jaws table Ø 610 mm. - n. 1 self centering chuck Ø 315 mm. - n. 2 closed steadies - n. 1 open steady - chipconveyor
Arluno, Italy
Trusted Seller
MAS KOSOVIT MT 70 x 2000 CNC LATHE
- Manufacturer: MAS KOSOVIT
Complete with: - n. 1 three jaws self centering chuck Ø 430 mm. - n. 1 x 8 positions turret - chipconveyor - full covered
Arluno, Italy
Trusted Seller
SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe
- Manufacturer: Spinner
Used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe The used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe is a robust CNC tilting bed lathe with ASA 8″ size flat guideways, with BARU...
Albairate, Italy
Trusted Seller
2008 YU SHINE YS VL 1200 ATC
- Manufacturer: YU SHINE
Type: CNC MOTORIZED VERTICAL LATHE | Conditions: Used | Status: Good | Type of control: Fanuc 0i-TC | Table diameter: Ø 1.250 mm | Max. load on table: 5.000 Kg | Max. swing diameter: Ø 1.600 mm | Max. turning di...
Torbole Casaglia, Italy
Trusted Seller
LATHE BIGLIA B565YS
- Manufacturer: Biglia
- Model: B 565
- Spindle bore: 76 millimeter
MAIN SPINDLE MAX. BAR DIAMETER: 70 MM MAX. TURNING DIAMETER: 290 MM MAX. TURNING LENGTH: 560 MM SPINDLE NOSE: A2-6 SPINDLE POWER: 11KW SPINDLE SPEED: 40-4000 RPM C AXIS: 360° INC. INDEXING 0.001° TURRET NUMBER OF...
Chiari, Italy
Trusted Seller
2001 TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader
- Manufacturer: Takamaz
Used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader The used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader is a fast CNC lathe with inclined shooting bench, 2 medium-sized axes with tailsto...
Albairate, Italy
Trusted Seller
2005 HANKOOK VTC 85
- Manufacturer: Hankook
- Model: VTC 85
Type: CNC VERTICAL LATHE | Condition : Used | Status: Good | Control type: FANUC 21i-TB | Max. swing over bed: Ø 1,000 mm | Max turning diameter : Ø 850 mm | Max. turning length: 850 mm | X axis travel: 480 mm ...
Torbole Casaglia, Italy