Used Materials Testing in Shandong, China

Long Gauge Length Axial Extensometers – Model 3542L

• Manufacturer: Epsilon

Long gauge length extensometers with gauge lengths greater than 2 inches (50 mm) for tensile and compression testing. These units have been specially designed for long gage length applications where low level str...

Axial Extensometer-Model 3542

• Manufacturer: Epsilon Technology Corp

These extensometers are designed for testing a wide range of materials, including metals, plastics, composites and ceramics. All will work in both tension and compression. The dual flexure design makes them very ...

High Temperature Transverse Extensometers (700 °C) – Model 7675

These transverse extensometers use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testi...

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

TE-UV2 Manual / Hydraulic

TE-UV2 Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cutting the notch according to t...

Miniature Transverse (Diametral) Extensometers – Model 3475

A miniature extensometer designed for general purpose transverse or diametral strain measurements on small or thin specimens. May be used simultaneously with the Model 3442 miniature axial extensometers or the Mo...

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

HV-1000 Micro Hardness Tester

Introduction: HV-1000 micro Vickers hardness tester is a high-tech product of optical and mechanical integration. The machine is novel in shape, has good reliability, operability and intuitiveness. It is a new ty...

HBRVS-187.5DU Senior Digital Brinell, Rockwell, Vickers Universal hardness testers series ( with Touch Screen)

• Manufacturer: Wilson Rockwell

Main features： 1. Equipped Brinell, Rockwell, Vickers test methods 2. Electronic and electric loading, high precision sensor, with a unique closed-loop control system 3. Eyepiece structure with digital encoder, m...

HBRVS-187.5ST Senior Digital Brinell, Rockwell, Vickers universal hardness tester

• Manufacturer: Wilson Rockwell

Main features： 1. Equipped Brinell, Rockwell, Vickers test methods 2. Electronic and electric loading, high precision sensor, with a unique closed-loop control system 3. Eyepiece structure with digital encoder, m...

Deflection Gages(Deflectometers)

• Manufacturer: Epsilon Technology Corp

Deflection is measured with a single arm with an attached spherical contact tip, similar to those on a dial indicator. The full bridge strain gaged construction provides an electrical output compatible with any e...

Digital Strain Meters – Model DSM-Plus

• Manufacturer: Epsilon Technology Corp

The DSM-Plus is ideal for customers who own several extensometers. When a configured extensometer is plugged in, the meter automatically recognizes it. It is also possible to calibrate the same extensometer in mu...

HBRVS-250DU Universal Hardness Tester

Main features： 1. There are three kinds of test methods: Brinell, Rockwell and Vickers. 2. Electric loading, high precision sensor, with a unique closed-loop control system 3. Eyepiece structure with digital enco...

Fracture Mechanics Clip-On Gages – Model 3541

The Model 3541 is designed for determination of fracture mechanics parameters such as JIC, KIC, R-curve, fatigue crack growth rate (da/dN), and testing to standards such as E1820, E399, E647, etc. These COD gages...